Chrysler Pacifica. Manual — part 680
INSTALLATION
(1) Support the engine assembly with a floor jack.
(2) Properly position the upper engine mount and
install the retaining bolts (Fig. 118).
(3) Tighten the bolts attached to the intake mani-
fold to 54 N·m (40 lbs. ft.).
(4) Tighten the bolts attached to the inner frame
rail to 68 N·m (50 lbs. ft.).
(5) Remove the jack used to support engine assem-
bly.
(6) Install the air cleaner element housing (Refer
to
9
-
ENGINE/AIR
INTAKE
SYSTEM/AIR
CLEANER HOUSING - INSTALLATION).
LEFT MOUNT
REMOVAL
(1) Disconnect the negative battery cable.
(2) Remove engine cover.
(3) Remove radiator cooling fan assembly (Refer to
7
-
COOLING/ENGINE/RADIATOR
FAN
-
REMOVAL).
(4) Raise and support the vehicle.
(5) Remove both of the engine mount to cradle
nuts (Fig. 119).
(6) Lower the vehicle.
Fig. 118 UPPER ENGINE MOUNT
1 - INTAKE MANIFOLD
2 - UPPER ENGINE MOUNT
3 - FRAME RAIL
Fig. 119 LEFT ENGINE MOUNT
1 - BOLT
3 - ENGINE MOUNT
2 - BRACKET
4 - LEFT EXHAUST MANIFOLD
CS
ENGINE 3.5L
9 - 75
UPPER MOUNT (Continued)
(7) Connect the engine suport fixture and support
engine weight.
(8) Remove the engine mount bolts and remove
mount (Fig. 119).
INSTALLATION
(1) Install engine mount to bracket. Tighten nut to
101 N·m (75 lbs. ft.) (Fig. 120).
(2) Install left mount to the engine block.Tighten
bolts to 54 N·m ( 40 lbs.ft.) (Fig. 120).
(3) Lower vehicle.
(4) Remove the engine support fixture.
(5) Raise and support the vehicle.
(6) Install both of the engine mount to cradle nut.
Tighten nut to 101 N·m (75 lbs. ft.) (Fig. 120).
(7) Lower vehicle.
(8) Install radiator fan assembly (Refer to 7 -
COOLING/ENGINE/RADIATOR FAN - INSTALLA-
TION).
(9) Install the engine cover.
(10) Connect the negative battery cable.
Fig. 120 LEFT ENGINE MOUNT
1 - BOLT
3 - ENGINE MOUNT
2 - BRACKET
4 - LEFT EXHAUST MANIFOLD
9 - 76
ENGINE 3.5L
CS
LEFT MOUNT (Continued)
RIGHT MOUNT
REMOVAL
(1) Disconnect the negative battery cable.
(2) Raise and support the vehicle.
(3) Remove both of the engine mount to cradle
nuts.
(4) Lower the vehicle.
(5) Connect the engine support fixture and support
the engine weight.
(6) Raise and support the vehicle.
(7) Remove the right mount bracket bolts (Fig.
121)
(8) Remove the engine mount top nut (Fig. 121).
(9) Remove the engine mount plate and engine
mount (Fig. 121).
Fig. 121 RIGHT ENGINE MOUNT
1 - POWER TRANSFER UNIT UPPER BRACKET
4 - BOLT
2 - POWER TRANSFER UNIT
5 - NUT
3 - ENGINE MOUNT BRACKET
6 - STRUCTURAL COVER
CS
ENGINE 3.5L
9 - 77
INSTALLATION
(1) Install the engine mount and plate.Tighten
bolts to 54 N·m (40 lbs. ft.) (Fig. 122).
(2) Install the engine mount upper nut. Tighten
nut to 101 N·m (75 lbs. ft.) (Fig. 122).
(3) Install
right
engine
mount
bracket
bolt-
s.Tighten bolts to 54 N·m (40 lbs. ft.) (Fig. 122).
(4) Lower the vehicle.
(5) Remove the engine support fixture.
(6) Raise and support the vehicle.
(7)
Install both lower engine mount to cradle
nuts. Tighten nuts to 101 N·m (75 lbs. ft.) (Fig. 122).
(8) Lower vehicle and connect the negative battery
cable.
Fig. 122 RIGHT ENGINE MOUNT
1 - POWER TRANSFER UNIT UPPER BRACKET
4 - BOLT
2 - POWER TRANSFER UNIT
5 - NUT
3 - ENGINE MOUNT BRACKET
6 - STRUCTURAL COVER
9 - 78
ENGINE 3.5L
CS
RIGHT MOUNT (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст