Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1396
P0706-TRANSMISSION RANGE SENSOR RATIONALITY
For a complete wiring diagram Refer to Section 8W
•
When Monitored:
With the ignition on.
•
Set Condition:
The ECM receives a CAN Bus message indicating the presence of a DTC in the TCM.
Possible Causes
VERIFY CURRENT DTC
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 9 - ENGINE -
DIAGNOSIS AND TESTING)
Diagnostic Test
1.
VERIFY CURRENT DTC
NOTE: Diagnose and repair all ECM DTCs prior to diagnosing any DTCs set in the TCM.
NOTE: This code was set in the ECM by the Transmission Control Module to indicate a transmission fault.
Diagnosis of transmission faults should be done using the Transmission Diagnostic Information.
NOTE: When repairs have been completed, DTCs in the ECM and TCM must be cleared.
Turn the ignition on.
With the scan tool, erase ECM DTCs only.
With the scan tool, read ECM DTCs.
Does this DTC reset?
Yes
>> Refer to Transmission Diagnostic Information for the related symptom(s).
No
>> Test Complete.
9 - 1608
ENGINE ELECTRICAL DIAGNOSTICS - DIESEL
LX
P0730-INCORRECT GEAR RATIO
For a complete wiring diagram Refer to Section 8W
•
When Monitored:
With the ignition on.
•
Set Condition:
The ECM receives a CAN Bus message indicating the presence of a DTC in the TCM.
Possible Causes
VERIFY CURRENT DTC
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 9 - ENGINE -
DIAGNOSIS AND TESTING)
Diagnostic Test
1.
VERIFY CURRENT DTC
NOTE: Diagnose and repair all ECM DTCs prior to diagnosing any DTCs set in the TCM.
NOTE: This code was set in the ECM by the Transmission Control Module to indicate a transmission fault.
Diagnosis of transmission faults should be done using the Transmission Diagnostic Information.
NOTE: When repairs have been completed, DTCs in the ECM and TCM must be cleared.
Turn the ignition on.
With the scan tool, erase ECM DTCs only.
With the scan tool, read ECM DTCs.
Does this DTC reset?
Yes
>> Refer to Transmission Diagnostic Information for the related symptom(s).
No
>> Test Complete.
LX
ENGINE ELECTRICAL DIAGNOSTICS - DIESEL
9 - 1609
P0740–TCC OUT OF RANGE
For a complete wiring diagram Refer to Section 8W
•
When Monitored:
With the ignition on.
•
Set Condition:
The ECM receives a CAN Bus message indicating the presence of a DTC in the TCM.
Possible Causes
VERIFY CURRENT DTC
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 9 - ENGINE -
DIAGNOSIS AND TESTING)
Diagnostic Test
1.
VERIFY CURRENT DTC
NOTE: Diagnose and repair all ECM DTCs prior to diagnosing any DTCs set in the TCM.
NOTE: This code was set in the ECM by the Transmission Control Module to indicate a transmission fault.
Diagnosis of transmission faults should be done using the Transmission Diagnostic Information.
NOTE: When repairs have been completed, DTCs in the ECM and TCM must be cleared.
Turn the ignition on.
With the scan tool, erase ECM DTCs only.
With the scan tool, read ECM DTCs.
Does this DTC reset?
Yes
>> Refer to Transmission Diagnostic Information for the related symptom(s).
No
>> Test Complete.
9 - 1610
ENGINE ELECTRICAL DIAGNOSTICS - DIESEL
LX
P0743–TCC SOLENOID CIRCUIT
For a complete wiring diagram Refer to Section 8W
•
When Monitored:
With the ignition on.
•
Set Condition:
The ECM receives a CAN Bus message indicating the presence of a DTC in the TCM.
Possible Causes
VERIFY CURRENT DTC
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 9 - ENGINE -
DIAGNOSIS AND TESTING)
Diagnostic Test
1.
VERIFY CURRENT DTC
NOTE: Diagnose and repair all ECM DTCs prior to diagnosing any DTCs set in the TCM.
NOTE: This code was set in the ECM by the Transmission Control Module to indicate a transmission fault.
Diagnosis of transmission faults should be done using the Transmission Diagnostic Information.
NOTE: When repairs have been completed, DTCs in the ECM and TCM must be cleared.
Turn the ignition on.
With the scan tool, erase ECM DTCs only.
With the scan tool, read ECM DTCs.
Does this DTC reset?
Yes
>> Refer to Transmission Diagnostic Information for the related symptom(s).
No
>> Test Complete.
LX
ENGINE ELECTRICAL DIAGNOSTICS - DIESEL
9 - 1611
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст