Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 513
CENTER HIGH MOUNTED STOP LAMP
REMOVAL
SEDAN
1. Disconnect and isolate the battery negative cable.
2. Remove the rear shelf trim panel (Refer to 23 -
BODY/INTERIOR/REAR SHELF TRIM PANEL -
REMOVAL).
3. Disconnect the CHMSL electrical connector (1).
4. Remove the two mounting fasteners (3) to the
CHMSL (2).
8L - 82
LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION
LX
WAGON
1. Remove the rear spoiler (Refer to 23 - BODY/EX-
TERIOR/SPOILER - REMOVAL).
2. With the rear spoiler on bench, remove the fasten-
ers and electrical connector from the CHMSL.
INSTALLATION
SEDAN
1. Place the center high mounted stop lamp (2) into
position at the bottom of the backlite.
2. Install and tighten the mounting fasteners (3).
3. Connect the electrical connector (1).
LX
LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION
8L - 83
4. Install the rear shelf trim (Refer to 23 - BODY/IN-
TERIOR/REAR SHELF TRIM PANEL - INSTALLA-
TION).
5. Connect the battery negative cable.
WAGON
1. Place the CHMSL on the spoiler (1) and install and
tighten the mounting fasteners.
2. Install the spoiler (Refer to 23 - BODY/EXTERIOR/
SPOILER - INSTALLATION).
8L - 84
LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION
LX
FOG LAMP UNIT
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Open hood and remove the upper radiator closeout
panel (2 and 4).
3. Remove the six upper fascia retaining fasteners
(Refer to 13 - FRAME & BUMPERS/BUMPERS/
FRONT FASCIA - REMOVAL).
4. Remove the headlamp unit (Refer to 8 - ELECTRI-
CAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP
UNIT - REMOVAL).
5. From behind the bumper fascia, disconnect the
harness connector.
6. Remove two fog lamp unit mounting fasteners.
7. Remove fog lamp unit (1).
LX
LAMPS/LIGHTING - EXTERIOR - SERVICE INFORMATION
8L - 85
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст