Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1516
CRANKSHAFT SPROCKET
1. Install crankshaft sprocket using Special Tools
6780-1 (1) and 8179 (2) until sprocket bottoms
against crankshaft step flange. Use care not to
rotate crankshaft.
2. Verify that crankshaft sprocket is installed to proper
depth by measuring from sprocket outer face to
end of crankshaft. Measurement should read:
39.05 ±0.50 mm (1.5374 ±0.020 in.).
3. Install primary timing chain (Refer to 9 - ENGINE/
VALVE
TIMING/TIMING
BELT/CHAIN
AND
SPROCKETS - INSTALLATION).
9 - 2088
ENGINE - 2.7L DOHC - SERVICE INFORMATION
LX
TENSIONER-TIMING CHAIN
REMOVAL
1. Disconnect negative battery (1) cable.
2. Remove timing chain cover (Refer to 9 - ENGINE/
VALVE TIMING/TIMING BELT / CHAIN COVER(S)
- REMOVAL).
LX
ENGINE - 2.7L DOHC - SERVICE INFORMATION
9 - 2089
3. Align timing marks (1),(3),(8) (Refer to 9 - ENGINE/VALVE TIMING - STANDARD PROCEDURE).
4. Remove timing chain tensioner cover (2).
5. Remove timing chain tensioner (1).
9 - 2090
ENGINE - 2.7L DOHC - SERVICE INFORMATION
LX
INSTALLATION
RESETTING TENSIONER
The timing chain tensioner is a spring loaded hydraulic tensioner. To reset the timing chain tensioner, the following
procedure must be followed.
1. Purge oil from timing chain tensioner using the following procedure:
a. Place the check ball end of tensioner (1) into the shallow end of Special Tool 8186 (3).
b. Using hand pressure, slowly depress tensioner (1) until all of the oil is purged out.
LX
ENGINE - 2.7L DOHC - SERVICE INFORMATION
9 - 2091
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст