Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 293
B1402-FRONT LEFT AUDIO SPEAKER OUTPUT CIRCUIT HIGH
For a complete wiring diagram Refer to Section 8W.
8A - 98
AUDIO - ELECTRICAL DIAGNOSTICS
LX
Possible Causes
SPEAKER
(X201) SPEAKER OUTPUT CIRCUIT (+)
(X291) SPEAKER OUTPUT CIRCUIT (-)
Diagnostic Test
1.
INTERMITTENT CONDITION
Turn the ignition on, then off, and then on again.
With the scan tool, read Radio DTCs.
Does the scan tool display active: B1402-FRONT LEFT AUDIO SPEAKER OUTPUT CIRCUIT HIGH?
Yes
>> Go To 2
No
>> The conditions that caused this code to set are not present at this time. Using the wiring diagram/sche-
matic as a guide, inspect the wiring and connectors.
Perform BODY VERIFICATION TEST VER-1.
2.
CHECK FOR VOLTAGE ON THE (X201) SPEAKER (+) CIRCUIT
Turn the ignition off.
Disconnect the Radio C1 harness connector.
Disconnect the Left Front Speaker harness connector.
Measure for voltage on the (X201) Speaker (+) circuit.
Is the voltage above 10.0 volts?
Yes
>> Repair the (X201) Speaker (+) circuit for a short to voltage.
Perform BODY VERIFICATION TEST VER-1.
No
>> Go To 3
LX
AUDIO - ELECTRICAL DIAGNOSTICS
8A - 99
3.
CHECK FOR VOLTAGE ON THE (X291) SPEAKER (-) CIRCUIT
Measure for voltage on the (X291) Speaker (-) circuit.
Is the voltage above 10.0 volts?
Yes
>> Repair the (X291) Speaker (-) circuit for a short to voltage.
Perform BODY VERIFICATION TEST VER-1.
No
>> Replace the Radio in accordance with the service informa-
tion.
Perform BODY VERIFICATION TEST VER-1.
8A - 100
AUDIO - ELECTRICAL DIAGNOSTICS
LX
B1403-FRONT LEFT AUDIO SPEAKER OUTPUT CIRCUIT OPEN
For a complete wiring diagram Refer to Section 8W.
LX
AUDIO - ELECTRICAL DIAGNOSTICS
8A - 101
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст