Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 108
GEAR-PINION/RING
REMOVAL
1. Remove differential assembly. (Refer to 3 - DIF-
FERENTIAL & DRIVELINE/REAR AXLE - 198MM/
DIFFERENTIAL - REMOVAL)
2. Place differential case in a soft-jawwed vise and
remove ring gear-to-case bolts.
3. Remove ring gear from differential case with a
brass drift and hammer.
4. Using
41mm
socket
and
flange
wrench Tool
C-3281 (1), remove pinion nut and discard.
3 - 164
REAR AXLE - 198RII
LX
5. Using puller Tool 1026 (1), remove pinion flange
(2).
6. Using a suitable screwdriver, remove and discard
the pinion seal.
7. Remove pinion tail bearing cone.
8. Move axle housing to press and press out pinion
shaft (1) as shown.
LX
REAR AXLE - 198RII
3 - 165
9. Remove collapsible spacer (1) and washers (2).
Discard collapsible spacer.
10. Remove pinion head bearing (2) with Puller
C-293-PA (1) and Adapters C-293-37 (3,4).
3 - 166
REAR AXLE - 198RII
LX
11. Using driver handle C-4171(2) and remover Tool
9084 (1), drive out pinion head bearing cup.
12. Remove pinion head shim. Measure and record
shim thickness.
13. Using driver handle C-4171 (2) and remover Tool
D-149 (1), drive out pinion tail bearing cup.
LX
REAR AXLE - 198RII
3 - 167
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст