Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 84
Using splitter 1130 or equivalent (2), press off pinion
head bearing (1).
3. Using a suitable punch, remove pinion tail bearing
cup (1).
4. Using suitable punch, remove pinion head bearing
cup (1).
3 - 68
FRONT AXLE - 175 FIA
LX
DIFFERENTIAL DISASSEMBLY
NOTE: The differential ring gear is welded to the differential case and is not serviceable separately.
1. Rotate differential side gears about case and
remove side gears (2) and thrust washers (1).
2. Using suitable punch, drive pinion shaft roll pin (1)
into case until it bottoms.
LX
FRONT AXLE - 175 FIA
3 - 69
3. Remove pinion shaft (1), pinion gears (3) and
thrust washers (2). Drive out and discard pinion
shaft roll pin.
4. Using Tool 9676 (1) and Tool 1130 (3), press differ-
ential side bearing (2) off of ring gear side and
discard.
5. Using Tool 9676 (1) and Tool 1130 (3), press differ-
ential side bearing (2) off of opposite side and
discard.
3 - 70
FRONT AXLE - 175 FIA
LX
AXLE HOUSING
1. Remove differential side bearing cup from axle
housing cover. Install Tool 6514 (1) as shown.
2. Remove differential side bearing cup with Tool
6514 (1).
LX
FRONT AXLE - 175 FIA
3 - 71
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст