Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 2164
TRUNK REAR TRIM PANEL
REMOVAL
1. Remove the four push-pin fasteners (1) that secure
the trunk rear trim panel (2) to the inside of the
deck opening lower panel (3).
2. Remove the trim panel from the vehicle.
INSTALLATION
1. Position the trunk rear trim panel (2) to the inside
of the deck opening lower panel (3).
2. Reinstall the four push-pin fasteners (1) that secure
the trim panel to the deck opening lower panel.
23 - 204
INTERIOR
LX
LIFTGATE
TABLE OF CONTENTS
page
page
LOCK CYLINDER - POLICE ONLY
BUMPER
GAS PROP
HINGE
LATCH
LATCH HANDLE
REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 214
LATCH STRIKER
LIFTGATE
TRIM PANEL
LX
LIFTGATE
23 - 205
LOCK CYLINDER - POLICE ONLY
REMOVAL
NOTE: Magnum Police Only
1. Open liftgate. Lock cylinder shown (1).
2. Remove fasteners (2) attaching liftgate lower trim
panel. (Refer to 23 - BODY/DECKLID/HATCH/LIFT-
GATE/TAILGATE/TRIM PANEL - REMOVAL)
3. Disconnect remote handle link from lock cylinder.
23 - 206
LIFTGATE
LX
4. Remove lock cylinder clip (1) from lock cylinder (2).
5. Remove lock cylinder (2).
INSTALLATION
NOTE: Magnum Police Only
1. Open liftgate.
2. Reinstall lock cylinder into liftgate lock hole (1).
LX
LIFTGATE
23 - 207
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст