Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1626
INSTALLATION - CAMSHAFT
1. Lubricate camshaft lobes and camshaft bearing
journals and insert the camshaft.
2. Install camshaft Tensioner plate assembly. Tighten
bolts to 28 N·m (250 in. lbs.) torque.
3. Install timing chain and sprockets (Refer to 9 -
ENGINE/VALVE
TIMING/TIMING
BELT/CHAIN
AND SPROCKETS - INSTALLATION).
4. Measure camshaft end play (Refer to 9 - ENGINE -
SPECIFICATIONS). If not within limits install a new
thrust plate.
9 - 2528
ENGINE - 6.1L SERVICE INFORMATION
LX
5. Install the oil pump (Refer to 9 - ENGINE/LUBRICATION/OIL PUMP - INSTALLATION).
6. Install the oil pick up tube.
7. Each tappet reused must be installed in the same position from which it was removed. When camshaft is
replaced, all of the tappets must be replaced.
LX
ENGINE - 6.1L SERVICE INFORMATION
9 - 2529
8. Install tappets (2) and retaining yoke assembly (1). (Refer to 9 - ENGINE/ENGINE BLOCK/HYDRAULIC LIFT-
ERS (CAM IN BLOCK) - INSTALLATION).
9. Install both left and right cylinder heads (4) (Refer
to 9 - ENGINE/CYLINDER HEAD - INSTALLA-
TION).
10. Install pushrods.
9 - 2530
ENGINE - 6.1L SERVICE INFORMATION
LX
11. Install rocker arms (Refer to 9 - ENGINE/CYLIN-
DER HEAD/ROCKER ARM / ADJUSTER ASSY -
INSTALLATION).
12. Install timing case cover (Refer to 9 - ENGINE/VALVE TIMING/TIMING BELT / CHAIN COVER(S) - INSTAL-
LATION).
13. Install the oil pan (Refer to 9 - ENGINE/LUBRICATION/OIL PAN - INSTALLATION).
LX
ENGINE - 6.1L SERVICE INFORMATION
9 - 2531
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст