Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1569
32. Remove transmission bell housing to engine block
bolts (2).
33. Lower the vehicle.
34. Install engine lift fixture (2), special tool # 8984
and 8984–UPD (4).
35. Separate
engine
from
transmission,
remove
engine from vehicle, and install engine assembly
on a repair stand.
9 - 2300
ENGINE - 5.7L SERVICE INFORMATION
LX
INSTALLATION - ENGINE
1. Install engine lift fixture (2) Special tool # 8984 and
8984–UPD (4).
2. Position the engine in the engine compartment.
3. Lower engine into compartment and align engine
with transmission.
4. Mate engine and transmission and install two trans-
mission to engine block mounting bolts finger tight.
5. Lower engine assembly until engine mount studs
rest in frame perches.
6. Install remaining transmission to engine block
mounting bolts (1, 2)and tighten.
7. Install and tighten engine mount to frame nuts.
LX
ENGINE - 5.7L SERVICE INFORMATION
9 - 2301
8. Install drive plate to torque converter bolts (1).
9. Install the torque convertor access cover (1).
9 - 2302
ENGINE - 5.7L SERVICE INFORMATION
LX
10. Install the starter (1) and connect the starter wires
(Refer to 8 - ELECTRICAL/STARTING/STARTER
MOTOR - INSTALLATION).
11. FOR AWD ONLY Install the intermediate shaft (2)
to the oil pan (3). Torque fasteners to 28N·m (21ft.
lbs).
12. FOR AWD ONLY Install the front differential
through the opening at the rear of the cradle, and
attach to the oil pan.
13. FOR AWD ONLY Fasten the differential (4) to the
oil pan (3) Torque to 65 N·m (48 ft. lbs).
LX
ENGINE - 5.7L SERVICE INFORMATION
9 - 2303
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст