Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1605
12. Install radiator lower hose.
13. Install both heater hoses.
14. Install radiator fan shroud.
15. Install the fan and fan drive assembly
16. Install the accessory drive belt.
17. Install the coolant bottle and washer bottle.
18. Install the upper radiator hose.
19. Install the air cleaner assembly.
20. Fill cooling system.
21. Refill engine oil.
22. Connect the battery negative cable.
23. Install the engine cover (1).
9 - 2444
ENGINE - 5.7L SERVICE INFORMATION
LX
TIMING CHAIN & SPROCKETS
REMOVAL
1. Disconnect battery negative cable.
2. Drain cooling system.
3. Remove Timing Chain Cover (1).
4. Re-install the vibration damper bolt finger tight.
Using a suitable socket and breaker bar, rotate the
crankshaft to align timing chain sprockets and key-
ways as shown.
CAUTION: The camshaft pin and the slot in the
cam sprocket must be clocked at 12:00 (2). The
crankshaft keyway must be clocked at 2:00 (3).
The crankshaft sprocket must be installed so that
the dots and or paint marking is at 6:00.
LX
ENGINE - 5.7L SERVICE INFORMATION
9 - 2445
5. Remove oil pump.
6. Retract tensioner shoe (1) until hole in shoe lines up with hole in bracket..
9 - 2446
ENGINE - 5.7L SERVICE INFORMATION
LX
7. Slide a suitable pin (1) into the holes.
8. Remove camshaft sprocket attaching bolt and
remove timing chain with crankshaft and camshaft
sprockets (2).
9. If tensioner assembly is to be replaced, remove the
tensioner to block bolts and remove tensioner
assembly.
LX
ENGINE - 5.7L SERVICE INFORMATION
9 - 2447
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст