Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1824
1. Position the front wheels straight-ahead.
2. Fully extend or pull out adjustable steering column.
3. Disconnect the negative (ground) cable from the battery.
4. Remove the airbag (3). (Refer to 8 - ELECTRICAL/
RESTRAINTS/DRIVER AIRBAG - REMOVAL).
5. Remove the steering wheel retainer bolt (2), then
slide the steering wheel (1) off the shaft.
19 - 114
COLUMN SERVICE INFORMATION
LX
6. Remove the steering column opening cover (1) (Refer to 23 - BODY/INSTRUMENT PANEL/STEERING COL-
UMN OPENING COVER - REMOVAL).
7. Remove the steering column opening reinforce-
ment (1).
LX
COLUMN SERVICE INFORMATION
19 - 115
8. Loosen at least one clockspring screw (1) to pre-
vent the clockspring from unwinding.
9. Back out the set screw (1) through the access hole
(3) in the steering column control module (SCCM)
(2) securing the multi-function SCCM assembly.
10. Pull the SCCM assembly (1) off the steering col-
umn shaft.
19 - 116
COLUMN SERVICE INFORMATION
LX
11. Manual tilt and telescoping columns – Unsnap and
move the adjustment handle locking tab (3) for-
ward as shown unlatching the handle (2) from the
column.
12. Remove four roll top shroud mounting screws and
remove roll top shroud (1) along with manual tilt/
telescope handle (3) (if equipped).
13. Remove the two retaining nuts (1) at the bulkhead
(2) for the steering column.
14. Remove the instrument cluster assembly. (Refer
to 8 - ELECTRICAL/INSTRUMENT CLUSTER -
REMOVAL)
LX
COLUMN SERVICE INFORMATION
19 - 117
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст