Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 2174
6. Install the hog rings on the rear side of seat cover.
7. Repeat the operation for the other side of cushion.
8. Position seat cover in to position on the foam and
check for seat cover wrinkles.
9. Connect the J-straps, and smooth out seat cover.
10. Steam wrinkles from seat cushion, if necessary.
23 - 244
SEATS
LX
11. Place seat cushion (4) into position.
12. Engage retainer loops into cup on floor kick up.
13. Push downward at forward edge at each retainer
loop of the rear seat cushion to engage retainers.
LX
SEATS
23 - 245
CUSHION/COVER-SEAT BACK - FRONT
REMOVAL
1. Before proceeding with the following repair proce-
dure, review all warnings and cautions. (Refer to
23 - BODY/SEATS - WARNING)
2. Remove the front seat. (Refer to 23 - BODY/
SEATS/SEAT - FRONT - REMOVAL)
3. Remove the lumbar and recliner handles (1).
4. Remove the screws and remove the side shields
(2).
5. Remove the belt buckle.
6. Remove the seat back bolts from both sides.
23 - 246
SEATS
LX
7. Push in the buttons on both headrest sleeves, pull
the headrest up and remove.
8. Separate the j-straps (1 & 2) and pull cover up
over frame and remove cushion.
9. Pinch both headrest sleeve ribs from inside the
seat back frame with pliers or equivalent.
10. Strike the bottom of the sleeve with a rubber mal-
let
or
equivalent,
and
remove
the
headrest
sleeves.
INSTALLATION
1. Before proceeding with the following repair proce-
dure, review all warnings and cautions. (Refer to
23 - BODY/SEATS - WARNING)
2. Position the seat back cover over the seat back
frame and install the headrest sleeves.
3. Position the seat back cushion on the frame and
position the cover over the cushion.
4. Connect the j-straps (1 & 2).
LX
SEATS
23 - 247
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст