Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1748
TANK-FUEL
REMOVAL
1. Release the fuel pressure, refer to the Fuel Pressure Release Procedure in this section.
2. Disconnect negative battery cable.
NOTE: The fuel level of the vehicle must be below 5/8 of a tank before you remove the module lock-rings.
If it is above that you can spill fuel in the vehicle.
3. Drain partial fuel from fuel tank through the filler
tube. Use a hard nylon tube, with a 30° cut on the
end, to push the check valve open to drain fuel
from tank.
4. Remove the rear lower seat cushion.
14 - 66
FUEL DELIVERY
LX
5. Push seat back and up to remove seat cushion.
6. Fold back the foam pad covering access cover for
modules.
LX
FUEL DELIVERY
14 - 67
7. Remove plastic access covers from floor pan right
side.
8. Disconnect the fuel supply line from module.
9. Mark the module orientation.
10. Use special tool #9340 to remove right side mod-
ule lock ring.
14 - 68
FUEL DELIVERY
LX
11. Drain fuel from right side of fuel tank. Lift module
up enough to push hose into tank and drain. Do
not spill fuel in interior of vehicle.
12. Disconnect the electrical connector from left side
module.
13. Mark the module orientation.
14. Use special tool #9340 to remove left side module
lock ring.
LX
FUEL DELIVERY
14 - 69
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст