Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1596
MOUNTING-ENGINE REAR
REMOVAL
1. Raise the vehicle on a hoist.
2. Using a suitable jack, support transmission.
3. Remove the crossmember (2).
4. Remove the fasteners (1) from the transmission
mount (3) to crossmember.
5. Remove the mount (3).
9 - 2408
ENGINE - 5.7L SERVICE INFORMATION
LX
6. Remove the transmission mount bracket (2), if
required.
INSTALLATION
1. Install the transmission mount bracket (2), if
removed.
LX
ENGINE - 5.7L SERVICE INFORMATION
9 - 2409
2. Position the transmission mount (3) on the trans-
mission mount bracket (2). Install the bolts (1) that
attach the transmission mount (3) to the bracket
(2).
3. Torque the bolts to N·m ( ft.lbs.) torque.
4. Install the crossmember (2).
9 - 2410
ENGINE - 5.7L SERVICE INFORMATION
LX
LUBRICATION
DESCRIPTION
The lubrication system is a full flow filtration pressure feed type.
DIAGNOSIS AND TESTING
DIAGNOSIS AND TESTING - CHECKING ENGINE OIL PRESSURE
1. Remove oil pressure sending unit and install gauge assembly C-3292.
2. Run engine until thermostat opens.
3. Oil Pressure:
•
Curb Idle–25 kPa (4 psi) minimum
•
3000 rpm–170 - 758 kPa (25 - 110 psi)
4. If oil pressure is 0 at idle, shut off engine. Check for a clogged oil pick-up screen or a pressure relief valve stuck
open.
DIAGNOSIS AND TESTING - ENGINE OIL LEAK
Begin with a thorough visual inspection of the engine, particularly at the area of the suspected leak. If an oil leak
source is not readily identifiable, the following steps should be followed:
LX
ENGINE - 5.7L SERVICE INFORMATION
9 - 2411
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст