Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 205
C1042-RIGHT FRONT TONE WHEEL PERFORMANCE
For a complete wiring diagram Refer to Section 8W.
•
When Monitored:
With the ignition on.
•
Set Condition:
When the Anti-Lock Brake Module detects periodic drops of a WSS signal.
Possible Causes
RIGHT FRONT TONE WHEEL/BEARING DAMAGE
DIRTY TONE WHEEL/SENSOR
Diagnostic Test
1.
CHECK FOR A DTC C1042-RIGHT FRONT TONE WHEEL PERFORMANCE
NOTE: This DTC must be active for the results of this test to be valid.
Turn the ignition on.
With the scan tool, read DTCs.
Record DTC and Freeze Frame information.
With the scan tool, erase DTCs.
Cycle the ignition switch off then on.
CAUTION: Ensure brake capability is available before road testing.
Test drive the vehicle in a straight line to 40 Km/h (25 mph).
NOTE: Vehicle must be driven above 40 km/h (25 m.p.h.) for set conditions to be meet.
With the scan tool, read DTCs.
Does the scan tool display: C1042-RIGHT FRONT TONE WHEEL PERFORMANCE?
Yes
>> Replace the Right Front Tone Wheel in accordance with the Service Information.
Perform ABS VERIFICATION TEST - VER 1. (Refer to 5 - BRAKES - STANDARD PROCEDURE).
No
>> Refer to the INTERMITTENT CONDITION diagnostic procedure.
Perform ABS VERIFICATION TEST - VER 1. (Refer to 5 - BRAKES - STANDARD PROCEDURE).
5 - 262
BRAKES - ABS ELECTRICAL DIAGNOSTICS
LX
C1043-LEFT REAR TONE WHEEL PERFORMANCE
For a complete wiring diagram Refer to Section 8W.
•
When Monitored:
With the ignition on.
•
Set Condition:
When the Anti-Lock Brake Module detects periodic drops of a WSS signal.
Possible Causes
LEFT REAR TONE WHEEL/BEARING DAMAGE
DIRTY TONE WHEEL/SENSOR
Diagnostic Test
1.
CHECK FOR A DTC C1043-LEFT REAR TONE WHEEL PERFORMANCE
NOTE: This DTC must be active for the results of this test to be valid.
Turn the ignition on.
With the scan tool, read DTCs.
Record DTC and Freeze Frame information.
With the scan tool, erase DTCs.
Cycle the ignition switch off then on.
CAUTION: Ensure brake capability is available before road testing.
Test drive the vehicle in a straight line to 40 Km/h (25 mph).
NOTE: Vehicle must be driven above 40 km/h (25 m.p.h.) for set conditions to be meet.
With the scan tool, read DTCs.
Does the scan tool display: C1043-LEFT REAR TONE WHEEL PERFORMANCE?
Yes
>> Go To 2
No
>> Refer to the INTERMITTENT CONDITION diagnostic procedure.
Perform ABS VERIFICATION TEST - VER 1. (Refer to 5 - BRAKES - STANDARD PROCEDURE).
2.
CHECK THE LEFT REAR TONE WHEEL FOR DAMAGE
NOTE: Check the tone wheel teeth for missing teeth, cracks, or looseness. Teeth should be perfectly
square, not bent, or nicked.
Check the Left Rear Tone Wheel for damage.
Check the Left Rear Tone Wheel for dirt.
Was the tone wheel dirty?
Yes
>> Clean tone wheel and sensor. Clear codes and retest.
Perform ABS VERIFICATION TEST - VER 1. (Refer to 5 - BRAKES - STANDARD PROCEDURE).
No
>> Replace the Left Rear Tone Wheel in accordance with the Service Information.
Perform ABS VERIFICATION TEST - VER 1. (Refer to 5 - BRAKES - STANDARD PROCEDURE).
LX
BRAKES - ABS ELECTRICAL DIAGNOSTICS
5 - 263
C1044-RIGHT REAR TONE WHEEL PERFORMANCE
For a complete wiring diagram Refer to Section 8W.
•
When Monitored:
With the ignition on.
•
Set Condition:
When the Anti-Lock Brake Module detects periodic drops of a WSS signal.
Possible Causes
RIGHT REAR TONE WHEEL/BEARING DAMAGE
DIRTY TONE WHEEL/SENSOR
Diagnostic Test
1.
CHECK FOR A DTC C1044-RIGHT REAR TONE WHEEL PERFORMANCE
NOTE: This DTC must be active for the results of this test to be valid.
Turn the ignition on.
With the scan tool, read DTCs.
Record DTC and Freeze Frame information.
With the scan tool, erase DTCs.
Cycle the ignition switch off then on.
CAUTION: Ensure brake capability is available before road testing.
Test drive the vehicle in a straight line to 40 Km/h (25 mph).
NOTE: Vehicle must be driven above 40 km/h (25 m.p.h.) for set conditions to be meet.
With the scan tool, read DTCs.
Does the scan tool display: C1044-RIGHT REAR TONE WHEEL PERFORMANCE?
Yes
>> Go To 2
No
>> Refer to the INTERMITTENT CONDITION diagnostic procedure.
Perform ABS VERIFICATION TEST - VER 1. (Refer to 5 - BRAKES - STANDARD PROCEDURE).
2.
CHECK THE RIGHT REAR TONE WHEEL FOR DAMAGE
NOTE: Check the tone wheel teeth for missing teeth, cracks, or looseness. Teeth should be perfectly
square, not bent, or nicked.
Check the Right Rear Tone Wheel for damage.
Check the Right Rear Tone Wheel for dirt.
Was the tone wheel dirty?
Yes
>> Clean tone wheel and sensor. Clear codes and retest.
Perform ABS VERIFICATION TEST - VER 1. (Refer to 5 - BRAKES - STANDARD PROCEDURE).
No
>> Replace the Right Rear Tone Wheel in accordance with the Service Information.
Perform ABS VERIFICATION TEST - VER 1. (Refer to 5 - BRAKES - STANDARD PROCEDURE).
5 - 264
BRAKES - ABS ELECTRICAL DIAGNOSTICS
LX
C1046–LEFT FRONT WHEEL PRESSURE PHASE MONITORING
For a complete wiring diagram Refer to Section 8W.
LX
BRAKES - ABS ELECTRICAL DIAGNOSTICS
5 - 265
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст