Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1695
MUFFLER
DESCRIPTION
The 2.7L/3.5L exhaust pipe assembly consists of:
•
Muffler and resonator assembly module (5)
•
Isolators (6)
The muffler and resonator assembly is serviced as an assembly.
EXHAUST PIPE ASSEMBLY V6
1 - BALL FLANGE
2 - CATALYTIC CONVERTER ASSEMBLY
3 - CROSS BRACE
4 - BAND CLAMPS
5 - RH REAR MUFFLER AND RESONATOR
6 - ISOLATORS
11 - 14
EXHAUST SYSTEM
LX
The 5.7L RH muffler and tailpipe assembly consists of:
•
Front exhaust pipe and muffler (2) and resonator (5)
•
Ball flange (1)
•
Isolators (4)
•
Band clamps (3)
The muffler and resonator assembly is serviced as an assembly.
The 6.1L RH muffler and tailpipe assembly consists of:
•
Front exhaust pipe and muffler (2) and resonator (5)
1 - BALL FLANGE
2 - FRONT EXHAUST PIPE MUFFLER AND RESONATOR ASSEMBLY
3 - BAND CLAMPS
4 - ISOLATOR
5 - RH REAR RESONATOR AND TAILPIPE ASSEMBLY
1 - BALL FLARE BAND CLAMP
2 - FRONT EXHAUST PIPE MUFFLER AND RESONATOR ASSEMBLY
3 - BAND CLAMPS
4 - ISOLATOR
5 - RH REAR RESONATOR AND TAILPIPE ASSEMBLY
LX
EXHAUST SYSTEM
11 - 15
•
Band clamp(1)
•
Isolators (4)
•
Band clamps (3)
The muffler and resonator assembly is serviced as an assembly.
REMOVAL
1. Raise vehicle.
2. Remove catalytic converter to muffler and resona-
tor clamps (2).
3. Remove nuts (1) and tunnel reinforcement (2).
11 - 16
EXHAUST SYSTEM
LX
4. 5.7L/6.1L Engine - Remove LH resonator and tailpipe assembly (Refer to 11 - EXHAUST SYSTEM/RESONATOR
- REMOVAL).
5. Remove isolators (4).
6. Remove muffler and tailpipe assembly (5) by twisting/turning while pulling assembly out of catalytic converters.
INSTALLATION
1. Position front exhaust pipe module clamps (2) on
exhaust pipe assembly.
2. Install exhaust pipe assembly into catalytic convert-
ers (3 and 4).
NOTE: Isolators will have an approximately 10°
forward angle when installed.
3. Install isolators.
LX
EXHAUST SYSTEM
11 - 17
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст