Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 531
DOOR COURTESY LAMP
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the front door trim panel (Refer to 23 -
BODY/DOOR - FRONT/TRIM PANEL - REMOVAL).
3. With the trim panel on bench, gently pull the door
courtesy lamp (1) out of courtesy lamp unit.
8L - 154
LAMPS/LIGHTING - INTERIOR - SERVICE INFORMATION
LX
INSTALLATION
1. Place the door courtesy lamp (1) into the courtesy
lamp unit.
2. Install the front door trim panel (Refer to 23 -
BODY/DOOR - FRONT/TRIM PANEL - INSTALLA-
TION).
3. Connect the battery negative cable.
LX
LAMPS/LIGHTING - INTERIOR - SERVICE INFORMATION
8L - 155
LIFTGATE LAMP
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Open liftgate.
3. Using a trim stick (3) (special tool #C-4755) or
equivalent, gently pry out on liftgate lamp lens (2)
and remove from trim panel (1).
4. Gently pry up on the edge of the affected lamp and
pull out of the liftgate lamp unit to remove.
INSTALLATION
1. Place new lamp over retaining clips in liftgate lamp
unit retaining clips and firmly snap into place.
8L - 156
LAMPS/LIGHTING - INTERIOR - SERVICE INFORMATION
LX
2. Place the liftgate lamp lens (2) over the retaining
pins making sure that they are lined up and then
firmly snap into place.
3. Connect the battery negative cable.
LX
LAMPS/LIGHTING - INTERIOR - SERVICE INFORMATION
8L - 157
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст