Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 118
Installer, 9231
Removal/Installation Arbor, 9522
Installer, 9523
Dial Indicator, 9524
Mounting Plate, 9630
Fixture, 9631
Puller Press, C-293-PA
Adapters, C-293-37
3 - 204
REAR AXLE - 210RII
LX
Installer, C-3095-A
Flange Wrench, C-3281
Dial Indicator Set, C-3339-A
Handle, C-4171
Installer, C-4310
Installer, D-146
Remover, D-149
Adapter, SP-3289
Spreader, W-129-B
LX
REAR AXLE - 210RII
3 - 205
SEAL-AXLE SHAFT
REMOVAL
1. Remove halfshaft(s). (Refer to 3 - DIFFERENTIAL
& DRIVELINE/HALF SHAFT - REMOVAL)
2. Using suitable screwdriver (1), remove axle shaft
seal (2).
3. Visually inspect halfshaft seal journal for damage
(excessive seal groove, nicks, scratches, etc.
Replace halfshaft if necessary.
INSTALLATION
1. Using Tool 9223 (2), install NEW axle shaft seal
(1). Lubricate the inside diameter with Mopar
T
Gear and Axle Lubricant 75W-140 to protect seal
during halfshaft installation.
2. Install halfshaft(s). (Refer to 3 - DIFFERENTIAL &
DRIVELINE/HALF SHAFT - INSTALLATION)
3 - 206
REAR AXLE - 210RII
LX
3. Remove fill plug (1) to check and adjust rear axle
fluid level. Top off axle with Mopar
T
Gear and Axle
Lubricant 75W-140. Reinstall fill plug and torque to
50 N·m (37 ft. lbs.) torque.
LX
REAR AXLE - 210RII
3 - 207
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст