Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 578
For a complete wiring diagram Refer to Section 8W.
•
When Monitored:
Continuously.
•
Set Condition:
When the Driver Door Lock Switch Mux circuit is between 0.15 and 0.8 volts for over 30 seconds.
Possible Causes
(G161) DRIVER DOOR LOCK SWITCH MUX CIRCUIT SHORT TO GROUND
(G161) DRIVER DOOR LOCK SWITCH MUX CIRCUIT SHORT TO THE (G167) DRIVER DOOR LOCK SWITCH
RETURN CIRCUIT
DOOR LOCK SWITCH SHORT TO GROUND
INSTRUMENT CLUSTER
Diagnostic Test
1.
TEST FOR INTERMITTENT CONDITION
With the scan tool, record and erase DTC’s
Operate the Driver Door Lock Switch in all positions several times.
Turn the ignition on and wait 30 seconds.
With the scan tool, read DTC’s.
Does the scan tool display B1804–DRIVER DOOR LOCK/UNLOCK SWITCH CIRCUIT STUCK UNLOCK?
Yes
>> Go To 2
No
>> The conditions that caused this code to set are not present at this time. Using the wiring diagram/sche-
matic as a guide, inspect the wiring and connectors.
Perform BODY VERIFICATION TEST - VER 1. (Refer to BODY VERIFICATION TEST – VER 1).
2.
DOOR LOCK SWITCH SHORTED
With the scan tool, erase DTC’s.
Disconnect the Driver Window/Door Lock Switch C1 and C2 connec-
tors.
With the scan tool, read DTC’s.
Does the scan tool display B1804–DRIVER DOOR LOCK/UN-
LOCK SWITCH CIRCUIT STUCK UNLOCK?
No
>> Replace the Driver Express Window/Door Lock Switch.
Perform BODY VERIFICATION TEST - VER 1. (Refer to
BODY VERIFICATION TEST – VER 1).
Yes
>> Go To 3
8N - 10
POWER LOCKS - ELECTRICAL DIAGNOSTICS
LX
3.
(G161) DRIVER DOOR LOCK SWITCH MUX CIRCUIT SHORT TO GROUND
Turn the ignition off.
Disconnect the Cluster C1 connector.
Measure the resistance between ground and the (G161) Driver Door
Lock Switch Mux circuit.
Is the resistance below 10000.0 ohms?
Yes
>> Repair the (G161) Driver Door Lock Switch Mux circuit for a
short to ground.
Perform BODY VERIFICATION TEST - VER 1. (Refer to
BODY VERIFICATION TEST – VER 1).
No
>> Go To 4
4.
(G161) DRIVER DOOR LOCK SWITCH MUX CIRCUIT SHORT TO (G167) DRIVER DOOR LOCK SWITCH
RETURN CIRCUIT
Disconnect the Cluster C2 connector.
Measure the resistance between the (G161) Driver Door Lock Switch
Mux circuit and the (G167) Driver Door Lock Switch Return circuit in
the Cluster C2 connector.
Is the resistance below 10000.0 ohms?
Yes
>> Repair the (G161) Driver Door Lock Switch Mux circuit for a
short to the (G167) Driver Door Lock Switch Return circuit.
Perform BODY VERIFICATION TEST - VER 1. (Refer to
BODY VERIFICATION TEST – VER 1).
No
>> Replace the Instrument Cluster.
Perform BODY VERIFICATION TEST - VER 1. (Refer to
BODY VERIFICATION TEST – VER 1).
LX
POWER LOCKS - ELECTRICAL DIAGNOSTICS
8N - 11
B1806–PASSENGER DOOR LOCK/UNLOCK SWITCH CIRCUIT LOW — CLUSTER
For a complete wiring diagram Refer to Section 8W.
8N - 12
POWER LOCKS - ELECTRICAL DIAGNOSTICS
LX
•
When Monitored:
Continuously.
•
Set Condition:
When the Passenger Door Lock Switch Mux circuit is below 0.15 volts for over 10 seconds.
Possible Causes
(G160) PASSENGER DOOR LOCK SWITCH MUX CIRCUIT SHORT TO GROUND
(G160) PASSENGER DOOR LOCK SWITCH MUX CIRCUIT SHORT TO THE (P37) PASSENGER DOOR LOCK
SWITCH RETURN CIRCUIT
DOOR LOCK SWITCH SHORT TO GROUND
INSTRUMENT CLUSTER
Diagnostic Test
1.
TEST FOR INTERMITTENT CONDITION
With the scan tool, record and erase DTC’s
Operate the Passenger Door Lock Switch in all positions several times.
Turn the ignition on and wait 30 seconds.
With the scan tool, read DTC’s.
Does the scan tool display B1806–PASSENGER DOOR LOCK/UNLOCK SWITCH CIRCUIT LOW?
Yes
>> Go To 2
No
>> The conditions that caused this code to set are not present at this time. Using the wiring diagram/sche-
matic as a guide, inspect the wiring and connectors.
Perform BODY VERIFICATION TEST - VER 1. (Refer to BODY VERIFICATION TEST – VER 1).
2.
DOOR LOCK SWITCH SHORTED
With the scan tool, erase DTC’s.
Disconnect the Passenger Express Window/Door Lock Switch connec-
tor.
With the scan tool, read DTC’s.
Does the scan tool display B1806–PASSENGER DOOR LOCK/
UNLOCK SWITCH CIRCUIT LOW?
No
>> Replace the Passenger Express Window/Door Lock Switch.
Perform BODY VERIFICATION TEST - VER 1. (Refer to
BODY VERIFICATION TEST – VER 1).
Yes
>> Go To 3
LX
POWER LOCKS - ELECTRICAL DIAGNOSTICS
8N - 13
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст