Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 2180
SUPPORT-LUMBAR
REMOVAL
1. Before proceeding with the following repair proce-
dure, review all warnings and cautions. (Refer to
23 - BODY/SEATS - WARNING)
2. Remove the seat back cushion/cover. (Refer to 23
- BODY/SEATS/SEAT BACK CUSHION / COVER -
FRONT - REMOVAL)
3. Release the lumbar mat side wires (1) by pulling
out on the wire supports and then pulling them in.
4. Squeeze the lower support wires (1) in and release
the lower wires.
23 - 268
SEATS
LX
5. Pull the upper support wires (1) down and release
the lumbar mat from the seat back frame.
6. Remove the rivet (1) and remove the lumbar mech-
anism (2).
LX
SEATS
23 - 269
INSTALLATION
1. Before proceeding with the following repair proce-
dure, review all warnings and cautions. (Refer to
23 - BODY/SEATS - WARNING)
2. Install the lumbar mechanism (2) and install a new
rivet (1).
3. Place lumbar mat onto seat back frame and insert
the upper support wires (1) into the frame.
23 - 270
SEATS
LX
4. Squeeze the lower support wires (1) together and
insert into the lower frame.
5. Squeeze the side support wires together and insert
them into the sides of the seat back frame.
6. Install the seat back cushion/cover. (Refer to 23 -
BODY/SEATS/SEAT BACK CUSHION / COVER -
FRONT - INSTALLATION)
LX
SEATS
23 - 271
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст