Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 326
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove rear fascia (Refer to 13 - FRAME &
BUMPERS/BUMPERS/REAR
FASCIA
-
REMOVAL).
3. Unsnap Park Assist Sensor from the retaining
housing and remove from fascia.
INSTALLATION
1. Position the Park Assist Sensor over the retaining
housing and firmly snap into housing in rear fascia.
2. Install the rear fascia (Refer to 13 - FRAME &
BUMPERS/BUMPERS/REAR FASCIA - INSTALLA-
TION).
3. Connect the battery negative cable.
8B - 70
CHIME/BUZZER - SERVICE INFORMATION
LX
CLOCK
TABLE OF CONTENTS
page
page
CLOCK - SERVICE INFORMATION
LX
CLOCK
8C - 1
CLOCK - SERVICE INFORMATION
DESCRIPTION
Some models include an analog clock. The time can
be adjusted by pushing the set button until it reaches
the desired time.
The analog clock is located in the instrument panel
center bezel, between the air distribution outlets. It
has one adjustment button for setting and no second
hand.
OPERATION
The analog clock is fed power through the M1 fuse. When installed, the clock, along with other noncritical options,
will be functional.
To set the analog clock, press and hold the adjustment button until desired time is reached.
8C - 2
CLOCK
LX
REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Remove the Instrument Panel Center Bezel (Refer
to
23
-
BODY/INSTRUMENT PANEL/INSTRU-
MENT PANEL CENTER BEZEL - REMOVAL).
3. Remove the two retaining screws (1) holding the
clock to the rear of the I/P Center Bezel.
LX
CLOCK
8C - 3
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст