Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1652
INSERTS, ASSEMBLY - 8952A
TOOL, FLYWHEEL LOCKING - 9102
PLIERS, FUEL LINE - 9539
ADAPTOR - 9543
Wrench, Oil Filter Cap - 9551
Remover, Fuel Injector - 9552
9 - 2632
ENGINE - 3.0L TD SERVICE INFORMATION
LX
ADAPTER, COMPRESSION TESTER - 9553
GUIDE, TIMING CHAIN - 9554
Retainer, Camshafts - 9555
LX
ENGINE - 3.0L TD SERVICE INFORMATION
9 - 2633
ELEMENT-AIR CLEANER
REMOVAL
NOTE: Housing removal is not necessary for element (filter) replacement.
1. Disconnect the negative battery cable. (Refer to 8 - ELECTRICAL/BATTERY SYSTEM/BATTERY - REMOVAL)
2. Disconnect the mass air flow (MAF) and air pressure sensor electrical connectors.
3. Pry up both spring clips from front of housing cover, (spring clips retain cover to housing).
4. Release housing cover from locating tabs located on rear of housing, and lift cover.
5. Remove air cleaner element from the housing.
9 - 2634
ENGINE - 3.0L TD SERVICE INFORMATION
LX
INSTALLATION
NOTE: Clean housing and inspect the gasket for damage before installing a clean filter. Replace as neces-
sary.
1. Install element into housing.
2. Position housing cover into rear housing locating tabs and seat cover onto housing.
3. Pry up spring clips and lock cover to housing.
4. Connect air intake duct and tighten clamp to 5 N.m
(44 in. lbs.).
5. Connect the MAF and air pressure sensor electrical
connectors.
6. Connect the negative battery cable.
LX
ENGINE - 3.0L TD SERVICE INFORMATION
9 - 2635
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст