Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 123
9. Install ring gear to case. Lightly tap ring gear into
position to facilitate starting of bolts.
10. Install new ring gear-to-case bolts and torque to
85 N·m (63 ft. lbs.).
11. Using Tool 9523 (2) and Handle C-4171 (1), press
new differential side bearings (3) onto differential
case.
INSTALLATION
NOTE: If replacement differential side bearings or differential case are being installed, it is necessary to
measure and adjust Differential Side Bearing Preload and Gear Backlash. Refer to Adjustments — Differen-
tial Side Bearing Preload and Gear Backlash to determine proper snap ring selection.
3 - 224
REAR AXLE - 210RII
LX
1. Install differential assembly (1) into axle housing.
Note:
If
difficulty
installing
differential
is
encountered due to interference with spreader
and plates, remove axle housing from spreader,
plates from housing, and install differential.
Return assembly to the spreader.
2. Install differential side bearing cups (2). Use tool
9522 (1) to aid in differential alignment.
3. Use Tool 9522 (1) to aid in seating side bearing
cups (2).
LX
REAR AXLE - 210RII
3 - 225
4. Set up Dial Indicator Set C-3339-A to measure
housing spread as shown:
a. Clamp SP-5426 (1)
b. Post SP-5425-B (2)
c. Metric Dial Indicator 9524 (3)
5. Expand spreader W-129-B (1) to spread axle hous-
ing no more than 0.30 mm (0.012 in.).
NOTE: The differential side bearing snap rings are select-fit, and control ring gear backlash and differential
side bearing preload. It is necessary to return snap rings to their original position. If replacement differential
side bearings, differential case, or axle housing are being installed, refer to Adjustments — Differential Side
Bearing Preload and Gear Backlash to determine proper snap ring selection.
3 - 226
REAR AXLE - 210RII
LX
6. Using suitable snap ring pliers (2), install differential
side bearing snap rings (1).
7. Back off W-129-B spreader (1) to relax tension on
housing.
8. Remove axle assembly from spreader. Remove
plates (1).
LX
REAR AXLE - 210RII
3 - 227
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст