Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 2123
GLASS
REMOVAL
1. Remove the trim panel from the inside of the front
door. (Refer to 23 - BODY/DOOR - FRONT/TRIM
PANEL - REMOVAL).
2. Remove the speaker from the inside of the front
door. (Refer to 8 - ELECTRICAL/AUDIO/SPEAKER
- REMOVAL).
3. Remove the inner belt weatherstrip from the front
door.
(Refer
to
23
-
BODY/WEATHERSTRIP/
SEALS/DOOR INNER BELT WEATHERSTRIP -
REMOVAL - FRONT).
4. Remove the watershield from the inside of the front
door. (Refer to 23 - BODY/DOOR - FRONT/WA-
TERSHIELD - REMOVAL).
5. Using the regulator, adjust the front door glass (1)
position up or down as required for access to the
two window regulator glass clamps (3).
6. Loosen the screw (3) in each of the glass clamps
far enough to release the glass.
7. From the outside of the front door, lift the glass (1)
upward far enough to disengage it from the two
glass clamps (2).
8. Lift the rear side of the glass upward and out from
the top of the door shell first to unload the glass
from the door.
23 - 40
DOOR - FRONT
LX
INSTALLATION
1. From the outside of the front door, insert the front
side of the glass (1) into the top of the door shell
first to load the glass into the door.
2. Engage the glass into the two window regulator
glass clamps (2).
3. Using the regulator, lower the window as required
for access to the two window regulator glass clamp
screws (2).
4. Tighten the screw in each of the glass clamps.
Tighten the screws to 10 N·m (90 in. lbs.).
5. Reinstall the watershield onto the inside of the front
door. (Refer to 23 - BODY/DOOR - FRONT/WA-
TERSHIELD - INSTALLATION).
6. Reinstall the inner belt weatherstrip onto the front
door.
(Refer
to
23
-
BODY/WEATHERSTRIP/
SEALS/DOOR INNER BELT WEATHERSTRIP -
INSTALLATION - FRONT).
7. Reinstall the speaker onto the inside of the front
door. (Refer to 8 - ELECTRICAL/AUDIO/SPEAKER
- INSTALLATION).
8. Reinstall the trim panel onto the inside of the front
door. (Refer to 23 - BODY/DOOR - FRONT/TRIM
PANEL - INSTALLATION).
LX
DOOR - FRONT
23 - 41
HINGE
REMOVAL
1. Remove the front door from the vehicle. (Refer to
23 - BODY/DOOR - FRONT/DOOR - REMOVAL).
2. Mark the upper or lower hinge bracket (2) location
on the outside of the lower A-pillar to aid reinstal-
lation.
3. Remove the screws (1) that secure the hinge
bracket to the outside of the lower A-pillar.
4. Remove the hinge bracket from the A-pillar.
5. Mark the upper (1) or lower (4) door hinge location
on the hinge face of the front door (2) to aid rein-
stallation.
6. Remove the screw (5) that secures the hinge to the
door.
7. Remove the nut (3) that secures the hinge to the
stud on the door.
8. Remove the upper or lower hinge from the hinge
face of the door.
23 - 42
DOOR - FRONT
LX
INSTALLATION
1. Position the upper (1) or lower (4) hinge to the
hinge face of the front door.
2. Install and tighten the nut (3) that secures the
hinge to the stud on the door. Tighten the nut to 28
N·m (21 ft. lbs.).
3. Install and tighten the screw (5) that secures the
hinge to the door. Tighten the screw to 28 N·m (21
ft. lbs.).
4. Position the upper or lower hinge bracket (2) onto
the outside of the lower A-pillar.
5. Install and tighten the three screws (1) that secure
the hinge bracket to the outside of the lower A-pil-
lar. Tighten the screws to 30 N·m (22 ft. lbs.).
6. Reinstall the front door onto the vehicle. (Refer to
23
-
BODY/DOOR
-
FRONT/DOOR
-
INSTALLATION).
LX
DOOR - FRONT
23 - 43
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст