Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 647
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0164-LOST COMMUNICATION WITH HVAC CONTROL MODULE
For a complete wiring diagram Refer to Section 8W.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0168-LOST COMMUNICATION WITH VEHICLE SECURITY CONTROL MODULE
(SKREEM/WCM)
For a complete wiring diagram Refer to Section 8W.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0169-LOST COMMUNICATION WITH SUNROOF CONTROL MODULE
For a complete wiring diagram Refer to Section 8W.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0181-LOST COMMUNICATION WITH HEADLAMP LEVELING TRANSLATOR
For a complete wiring diagram Refer to Section 8W.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0184-LOST COMMUNICATION WITH RADIO
For a complete wiring diagram Refer to Section 8W.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0186-LOST COMMUNICATION WITH AUDIO AMPLIFIER
For a complete wiring diagram Refer to Section 8W.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0186-LOST COMMUNICATION WITH AUDIO AMPLIFIER
For a complete wiring diagram Refer to Section 8W.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0195-LOST COMMUNICATION WITH SDARS
For a complete wiring diagram Refer to Section 8W.
8N - 286
POWER WINDOWS - ELECTRICAL DIAGNOSTICS
LX
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0199-LOST COMMUNICATION WITH DRIVER DOOR MODULE
For a complete wiring diagram Refer to Section 8W.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0200-LOST COMMUNICATION WITH PASSENGER DOOR MODULE
For a complete wiring diagram Refer to Section 8W.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0208-LOST COMMUNICATION WITH HEATED SEAT CONTROL MODULE
For a complete wiring diagram Refer to Section 8W.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0209-LOST COMMUNICATION WITH MEMORY SEAT CONTROL MODULE
For a complete wiring diagram Refer to Section 8W.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0212-LOST COMMUNICATION WITH SCCM - CAN B
For a complete wiring diagram Refer to Section 8W.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
U0231-LOST COMMUNICATION WITH RAIN SENSING MODULE
For a complete wiring diagram Refer to Section 8W.
(Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the diagnostic
test procedure.
LX
POWER WINDOWS - ELECTRICAL DIAGNOSTICS
8N - 287
*FRONT WINDOW MOVES ABOUT 3 INCHES AND QUITS
NOTE: The Driver circuits are shown but the Passenger side is similar.
8N - 288
POWER WINDOWS - ELECTRICAL DIAGNOSTICS
LX
For a complete wiring diagram Refer to Section 8W.
Possible Causes
WINDOW HALL SENSOR A AND SENSOR B SIGNAL CIRCUITS OPEN
WINDOW MOTOR (HALL SENSOR OPEN)
Diagnostic Test
1.
TEST FOR DIAGNOSTIC TROUBLE CODES
Turn the ignition on.
With the scan tool, read DTC’s.
Does the scan tool display any Power Window related DTC’s?
No
>> Go To 2
Yes
>> Refer to symptom list for problems related to POWER WINDOWS.
Perform BODY VERIFICATION TEST - VER 1. (Refer to BODY VERIFICATION TEST – VER 1).
2.
WINDOW HALL SENSOR A AND SENSOR B SIGNAL CIRCUIT OPEN
NOTE: Both Window Hall Sensor Signal circuits (A and B) must be open or closed for the result of this test
to be valid.
Disconnect the appropriate Door Module C2 connector.
Disconnect the appropriate Window Motor connector.
Measure the resistance of the Window Hall Sensor A Signal circuit between the Motor connector and the Module C2
connector.
Measure the resistance of the Window Hall Sensor B Signal circuit between the Motor connector and the Module C2
connector.
Is the resistance below 2.0 ohms on both Signal circuits?
No
>> Repair the Window Hall Sensor Signal circuits for opens.
Perform BODY VERIFICATION TEST - VER 1. (Refer to BODY VERIFICATION TEST – VER 1).
Yes
>> Replace the Window Motor.
Perform BODY VERIFICATION TEST - VER 1. (Refer to BODY VERIFICATION TEST – VER 1).
LX
POWER WINDOWS - ELECTRICAL DIAGNOSTICS
8N - 289
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст