Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1593
REMOVAL
1. Disconnect the negative battery cable.
2. Remove the intake manifold. (Refer to 9 - ENGINE/MANIFOLDS/INTAKE MANIFOLD - REMOVAL).
3. Remove wiring harness connectors from the MDS solenoids.
4. Remove hold down bolt from MDS solenoid.
5. Remove MDS solenoid.
INSTALLATION
1. Verify that MDS bores are free of debris, before solenoid installation.
2. Install MDS solenoid fully into block.
3. Install hold down bolt and torque to 11 N·m (97 in. lbs.).
4. Reconnect the MDS wiring harness to the solenoids.
5. Install the intake manifold. (Refer to 9 - ENGINE/MANIFOLDS/INTAKE MANIFOLD - INSTALLATION).
9 - 2396
ENGINE - 5.7L SERVICE INFORMATION
LX
ENGINE MOUNTING-FRONT
REMOVAL
REMOVAL
1. Disconnect negative battery cable.
2. Raise vehicle.
3. Remove the generator support bracket (1).
LX
ENGINE - 5.7L SERVICE INFORMATION
9 - 2397
4. Remove hydromount to frame studs (3,4) and nuts.
5. Raise engine using suitable jack.
6. Remove hydromount to bracket fasteners (1,2).
7. Remove hydromount from engine.
9 - 2398
ENGINE - 5.7L SERVICE INFORMATION
LX
8. Remove engine mount brackets (1), if needed.
REMOVAL - AWD
LX
ENGINE - 5.7L SERVICE INFORMATION
9 - 2399
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст