Chrysler 300/300 Touring/300C, Dodge Magnum. Manual — part 1579
CAUTION: The rocker shaft assemblies are not
interchangeable between intake and exhaust. The
intake rocker arms are marked with the letter “I”.
3. Install rocker shaft assemblies in the same order
as removed.
4. Tighten the rocker shaft bolts to 22 N·m (195 in.
lbs.) torque,using the sequence provided.
CAUTION: DO NOT rotate or crank the engine dur-
ing or immediately after rocker arm installation.
Allow the hydraulic roller tappets adequate time to
bleed down (about 5 minutes).
5. Remove pushrod retaining plate (1) special tool
9070.
9 - 2340
ENGINE - 5.7L SERVICE INFORMATION
LX
6. Install cylinder head cover (Refer to 9 - ENGINE/
CYLINDER HEAD/CYLINDER HEAD COVER(S) -
INSTALLATION).
LX
ENGINE - 5.7L SERVICE INFORMATION
9 - 2341
SEALS-VALVE GUIDE
DESCRIPTION
The valve guide seals are made of rubber and incorporate an integral steel valve spring seat. The integral garter
spring maintains consistent lubrication control to the valve stems.
9 - 2342
ENGINE - 5.7L SERVICE INFORMATION
LX
SPRINGS-VALVE
REMOVAL
1. Disconnect negative battery cable.
2. Remove air cleaner assembly.
3. Remove air intake resonator.
4. Remove ignition coil connector (1).
5. Remove ignition coils (2).
6. Remove one spark plug.
LX
ENGINE - 5.7L SERVICE INFORMATION
9 - 2343
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст