Chrysler New Yorker. Manual — part 347
INTRODUCTION
CONTENTS
page
page
GENERAL INFORMATION
BODY CODE PLATE . . . . . . . . . . . . . . . . . . . . . . 2
E-MARK LABEL . . . . . . . . . . . . . . . . . . . . . . . . . 1
MANUFACTURER PLATE . . . . . . . . . . . . . . . . . . 4
VEHICLE IDENTIFICATION NUMBER . . . . . . . . . 1
VIN CHECK DIGIT . . . . . . . . . . . . . . . . . . . . . . . . 1
GENERAL INFORMATION
E-MARK LABEL
An E-mark Label (Fig. 1) is located on the rear
shut face of the driver’s door. The label contains the
following information:
• Date of Manufacture
• Month-Day-Hour (MDH)
• Vehicle Identification Number (VIN)
• Country Codes
• Regulation Number
• Regulation Amendment Number
• Approval Number
VEHICLE IDENTIFICATION NUMBER
The Vehicle Identification Number (VIN) is located
on the upper left corner of the instrument panel,
near the left windshield pillar (Fig. 2). The VIN con-
sists of 17 characters in a combination of letters and
numbers that provide specific information about the
vehicle. Refer to VIN Code Breakdown table for
decoding information.
VIN CHECK DIGIT
To protect the consumer from theft and possible
fraud the manufacturer is required to include a
Check Digit at the ninth position of the Vehicle Iden-
tification Number. The check digit is used by the
manufacturer and government agencies to verify the
authenticity of the vehicle and official documenta-
tion. The formula to use the check digit is not
released to the general public.
Fig. 1 E-Mark Label
Fig. 2 Vehicle Identification Number (VIN Plate)
300M
INTRODUCTION
1
BODY CODE PLATE
LOCATION AND DECODING
The Body Code Plate (Fig. 3) is located in the
engine compartment on the battery tray front side
(Fig. 4). There are seven lines of information on the
body code plate. Lines 4, 5, 6, and 7 are not used to
define service information. Information reads from
left to right, starting with line 3 in the center of the
plate to line 1 at the bottom of the plate.
BODY CODE PLATE – LINE 3
DIGITS 1 THROUGH 12
Vehicle Order Number
DIGITS 13, THROUGH 15
Vinyl Roof Code
DIGITS 16 AND 17
Open space
VIN DECODING INFORMATION
POSITION
INTERPRETATION
CODE = DESCRIPTION
1
Country of Origin
1 = Built in U.S.A. by Chrysler Corporation
2 = Built in Canada by Chrysler Canada Ltd.
2
Make
C = Chrysler
3
Vehicle Type
3 = Passenger Car
4
Passenger Safety
H = Restraint System - Active Driver and Passenger Air Bags
5
Car Line
E = Chrysler, 300M
6
Series
4 = High Line
5 = Premium
6 = Sport
7
Body Style
6 = 4 Door Sedan
8
Engine
G = 3.5L 6 Cyl 24 Valve Gasoline SOHC Alum. Block
R = 2.7L 6 Cyl 24 Valve DOHC Alum. Block
9
Check Digit
See explanation in this section.
10
Model Year
W = 1998
X = 1999
11
Assembly Plant
H = Bramelea Assembly
12 through 17
Sequence Number
6 digit number assigned by assembly plant.
Fig. 3 Body Code Plate
Fig. 4 Body Code Plate Location
2
INTRODUCTION
300M
GENERAL INFORMATION (Continued)
DIGITS 18 AND 19
Vehicle Shell Line
• LH
DIGITS 20
Carline
• C = Chrysler
• Y = Chrysler
DIGIT 21
Price Class
• E = Economy
• H = High Line
• L = Low Line
• M = Mid Line
• P = Premium
• S = Special/Sport
• X = Performance Image
DIGITS 22 AND 23
Body Type
• 41 = Four Door Sedan
BODY CODE PLATE LINE 2
DIGITS 1, 2, AND 3
Paint procedure
DIGIT 4
Open Space
DIGITS 5 THROUGH 7
Primary paint
See Group 23, Body for color codes.
DIGITS 8 and 9
Open Space
DIGITS 10 THROUGH 12
Secondary Paint
DIGITS 13 and 14
Open Space
DIGITS 15 THROUGH 18
Interior Trim Code
DIGIT 19
Open Space
DIGITS 20, 21, AND 22
Engine Code
• EER = 2.7 L, Six Cylinder, 24 Valve, DOHC,
Gasoline, Aluminum Block
• EGG = 3.5 L, Six Cylinder, 24 Valve, SOHC,
Gasoline, Aluminum Block
DIGIT 23
Open Space
BODY CODE PLATE LINE 1
DIGITS 1, 2, AND 3
Transaxle Codes
• DGX = 42LE four speed Electronic Automatic
Transaxle
DIGIT 4
Open Space
DIGIT 5
Market Code
• B = International
DIGIT 6
Open Space
DIGITS 7 THROUGH 23
Vehicle Identification Number
• Refer to Vehicle Identification Number (VIN)
paragraph for proper breakdown of VIN code.
IF TWO BODY CODE PLATES ARE REQUIRED
The last code shown on either plate will be fol-
lowed by END. When two plates are required, the
last code space on the first plate will indicate (CTD).
When a second plate is required, the first four
spaces of each line will not be used due to overlap of
the plates.
300M
INTRODUCTION
3
GENERAL INFORMATION (Continued)
MANUFACTURER PLATE
The Manufacturer Plate (Fig. 5) is located in the
engine compartment on the radiator closure panel
crossmember adjacent to the Body Code Plate. The
plate contains five lines of information:
1. Vehicle Identification Number (VIN)
2. Gross Vehicle Mass (GVM)
3. Gross Train Mass (GTM)
4. Gross Front Axle Rating (GFAR)
5. Gross Rear Axle Rating (GRAR)
Fig. 5 Manufacturer Plate
4
INTRODUCTION
300M
GENERAL INFORMATION (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст