Chrysler Pacifica Hybrid (2022 year). Manual in english — page 12

186

STARTING AND OPERATING

(Continued)

(Continued)

D

RIVING

T

HROUGH

W

ATER

Driving through water more than a few inches/

centimeters deep will require extra caution to

ensure safety and prevent damage to your vehicle.

Flowing/Rising Water

Shallow Standing Water

Although your vehicle is capable of driving through

shallow standing water, consider the following

Warnings and Cautions before doing so.

WARNING!

Do not drive on or across a road or path where

water is flowing and/or rising (as in storm

run-off). Flowing water can wear away the road

or path's surface and cause your vehicle to sink

into deeper water. Furthermore, flowing and/or

rising water can carry your vehicle away swiftly.

Failure to follow this warning may result in

injuries that are serious or fatal to you, your

passengers, and others around you.

WARNING!



Driving through standing water limits your

vehicle’s traction capabilities. Do not exceed

5 mph (8 km/h) when driving through

standing water.



Driving through standing water limits your

vehicle’s braking capabilities, which increases

stopping distances. Therefore, after driving

through standing water, drive slowly and

lightly press on the brake pedal several times

to dry the brakes.



Failure to follow these warnings may result in

injuries that are serious or fatal to you, your

passengers, and others around you.

CAUTION!



Always check the depth of the standing water

before driving through it. Never drive through

standing water that is deeper than the bottom

of the tire rims mounted on the vehicle.



Determine the condition of the road or the

path that is under water and if there are any

obstacles in the way before driving through

the standing water.



Do not exceed 5 mph (8 km/h) when driving

through standing water. This will minimize

wave effects.

WARNING!



Driving through standing water may cause

damage to your vehicle’s drivetrain compo

-

nents. Always inspect your vehicle’s fluids

(i.e., engine oil, transmission, axle, etc.) for

signs of contamination (i.e., fluid that is milky

or foamy in appearance) after driving through

standing water. Do not continue to operate

the vehicle if any fluid appears contaminated,

as this may result in further damage. Such

damage is not covered by the New Vehicle

Limited Warranty.



Getting water inside your vehicle’s engine can

cause it to lock up and stall out, and cause

serious internal damage to the engine. Such

damage is not covered by the New Vehicle

Limited Warranty.

CAUTION!

187

MULTIMEDIA

UCONNECT SYSTEMS

For detailed information about your Uconnect 5

With 7-inch Display or Uconnect 5/5 NAV With

10.1-inch Display system, refer to your Uconnect

Owner’s Manual Supplement.

NOTE:

Uconnect screen images are for illustration

purposes only and may not reflect exact software

for your vehicle.

CYBERSECURITY

Your vehicle may be a connected vehicle and may

be equipped with both wired and wireless

networks. These networks allow your vehicle to

send and receive information. This information

allows systems and features in your vehicle to

function properly.

Your vehicle may be equipped with certain security

features to reduce the risk of unauthorized and

unlawful access to vehicle systems and wireless

communications. Vehicle software technology

continues to evolve over time and FCA US LLC,

working with its suppliers, evaluates and takes

appropriate steps as needed.
The risk of unauthorized and unlawful access to

your vehicle systems may still exist, even if the

most recent version of vehicle software (such as

Uconnect software) is installed.

NOTE:



To help further improve user experience,

features, stability, etc., and minimize the poten

-

tial risk of a security breach, vehicle owners

should:



Routinely check

www.driveuconnect.com

(US Residents) or

www.driveuconnect.ca

(Canadian Residents) to learn about avail

-

able Uconnect software updates.



Only connect and use trusted media

devices (e.g. personal mobile phones,

USBs, CDs).

WARNING!



ONLY insert trusted devices/components into

your vehicle. Media of unknown origin could

possibly contain malicious software, and if

installed in your vehicle, it may increase the

possibility for vehicle systems to be breached.



As always, if you experience unusual vehicle

behavior, take your vehicle to your nearest

authorized dealer immediately.

5

188

MULTIMEDIA

UCONNECT SETTINGS

The Uconnect system uses a combination of

buttons on the touchscreen and buttons on the

faceplate located on the center of the instrument

panel. These buttons allow you to access and

change the Customer Programmable Features.

Many features can vary by vehicle.
Buttons on the faceplate are located below and/or

beside the Uconnect system in the center of

the instrument panel. In addition, there is a

SCROLL/ENTER control knob located on the right

side. Turn the control knob to scroll through menus

and change settings. Push the center of the

control knob one or more times to select or

change a setting.

Your Uconnect system may also have SCREEN OFF

and MUTE buttons on the faceplate.
Push the SCREEN OFF button on the faceplate to

turn off the Uconnect screen. Push the button

again or tap the screen to turn the screen on.
Press the Back Arrow button to exit out of a Menu

or certain option on the Uconnect system.
Push and hold the Power button on the radio’s

faceplate for a minimum of 15 seconds to reset

the radio.

C

USTOMER

P

ROGRAMMABLE

F

EATURES

Uconnect 5/5 NAV With 10.1-inch Display

1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate

MULTIMEDIA

189

For the Uconnect 5 With 7-inch Display and the Uconnect 5/5 NAV With 10.1-inch Display

KeySense

The vehicle’s KeySense settings are protected by a unique four-digit PIN, which the vehicle owner creates when accessing the specific settings for the first

time. This four-digit PIN can only be reset by an authorized dealer.
After pressing the KeySense button on the touchscreen, and entering the KeySense PIN, the following settings will be available:

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Forward Collision Warning Sensitivity

This setting will change the distance at which the Forward Collision Warning

(FCW) alert sounds. The “Medium” setting will have the FCW system signal

when an object is in view, and the possibility of a collision is detected. The

“Near” setting will have the FCW system signal when the object is closer to the

vehicle. The “Far” setting will have the FCW system signal when an object is at

a far distance from the vehicle.

Forward Collision Warning

This setting will turn the Forward Collision Warning (FCW) system on or off. The

“Warning Only” setting will provide only an audible chime when a collision is

detected. The “Warning + Active Braking” setting will provide an audible chime

and apply some brake pressure when a collision is detected.

ParkSense

This setting will change the type of ParkSense alert when a close object is

detected. The “Sound Only” setting will provide an audible chime when an

object is detected. The “Sound and Display” setting will provide both an

audible chime and a visual display when an object is detected.

Front ParkSense Volume

This setting adjusts the volume of the Front ParkSense system. The available

settings are “Low”, “Medium”, and “High”.

5

190

MULTIMEDIA

My Profile

Rear ParkSense Volume

This setting adjusts the volume of the Rear ParkSense system. The available

settings are “Low”, “Medium”, and “High”.

Rear ParkSense Braking Assist

This setting will turn the Rear ParkSense Braking Assist on or off.

Blind Spot Alert

This setting will change the type of alert provided when an object is detected in

a vehicle’s blind spot. The “Lights” setting will activate the Blind Spot Alert

lights on the outside mirrors. The “Lights & Chime” setting will activate both

the lights on the outside mirrors and an audible chime.

Maximum Vehicle Speed

This setting adjusts the Maximum Vehicle Speed. This feature can be set to

65, 70, 75, 80, or 85 mph (90, 95, 100, 105 or 110 km/h) by using the “-”

and “+” options.

Start Up Fuel Level Message

This setting will turn the Start Up Fuel Level Message on or off.

Earlier Low Fuel Alert

This setting will turn the Earlier Low Fuel Alert on or off.

Setting Name

Description

When the My Profile button is pressed on the touchscreen, the system displays options related to the vehicle’s profiles.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Language

This setting will change the language of the Uconnect system and Instrument

Cluster Display. The available languages are English, Français, Español, and

Italiano.

Display Mode

The setting will adjust the display for the radio to “Auto” or “Manual”.

“Manual” allows for more customization with the radio display.

MULTIMEDIA

191

Display Brightness Headlights On

This setting will allow you to set the brightness when the headlights are on. To

access this setting, Display Mode must be set to “Manual”. The “+” setting will

increase the brightness; the “-” will decrease the brightness.

Display Brightness Headlights Off

This setting will allow you to set the brightness when the headlights are off. To

access this setting, Display Mode must be set to “Manual”. The “+” setting will

increase the brightness; the “-” will decrease the brightness.

Set Theme

This setting will allow you to change the theme of the radio.

Units

This setting changes the “Speed” (MPH or km/h), “Distance” (mi or km), “Fuel

Consumption” (MPG [US], MPG [UK], L/100 km, or km/L), “Pressure” (psi,

kPa, or bar), “Temperature” (°C or °F), and “Current Consumption” (MPG

[US], MPG [UK], L/100 km, or km/L) units of measurement independently.

Touchscreen Beep

This setting will allow you to turn the touchscreen beep on or off.

Show Main Category Bar Labels

This setting will allow the main category bar labels to be shown on or off.

Navigation Next Turn Displayed in Cluster

This setting will display navigation prompts in the Instrument Cluster Display.

Phone Pop-Ups Displayed In Cluster

This setting will display smartphone notifications and messages in the

Instrument Cluster Display.

System Text Size

This setting will allow you to change the text on the radio to “Standard”,

“Large”, and “Taller”.

Time Format

This setting will allow you to set the time format (AM/PM). Sync Time With

GPS must be “Off” for this setting to be available. The “12 hrs” setting will set

the time to a 12-hour format. The “24 hrs” setting will set the time to a

24-hour format.

Setting Name

Description

5

192

MULTIMEDIA

Voice Options

This setting will allow you to change the voice options for the radio to

“Male” or “Female”.

Wake Up Word

This setting will allow you to turn the voice recognition “Wake Up” word

on or off.

Voice Barge-in

This setting will allow you to turn the voice recognition barge-in feature

on or off.

Show Command List

This setting will allow the Command List to be shown on or off.

Key Off Power Delay

This setting will keep certain electrical features running after the engine is

turned off. When any door is opened, the electronics will deactivate. The

available settings are “0 sec”, “45 sec”, “5 min”, and “10 min”.

Radio Off With Door

This setting will turn the radio off when the driver or passenger door is

opened. The available settings are “On” and “Off”.

App Drawer Favoriting Popups

This setting will allow you to favorite app drawer pop-ups with “On” and

“Off” options.

App Drawer Unfavoritings Popups

This setting will allow you to unfavorite app drawer pop-ups with “On” and

“Off” options.

New Text Message Popups

This setting will allow you to have pop-up notifications for new text messages.

This setting options are “On” and “Off”.

Setting Name

Description

MULTIMEDIA

193

Missed Calls Message

This setting will allow you to have pop-up notifications for missed calls. This

setting options are “On” and “Off”.

Navigation Popups

This setting will allow you to have pop-up notifications for Navigation. This

setting options are “On” and “Off”.

Navigation Settings

This setting will allow you to customize the settings within Navigation Mode.

Auto-On Driver Heated Seat & Steering Wheel

This setting will activate the vehicle’s comfort systems and heated seats or

heated steering wheel when the vehicle is remote started or ignition is

started. The “Off” setting will not activate the comfort systems. The “Remote

Start” setting will only activate the comfort systems when using Remote Start.

The “All Start” setting will activate the comfort systems whenever the vehicle

is started.

Audio Settings

This setting will take you to the audio settings for the vehicle profiles.

Reset App Drawer to Default Order

This setting will reset the app drawer to its factory default layout.

Restore Settings to Default

This setting will return all the previously changed settings to their

factory default.

More Profile Options

This setting will give access to more profile options.

Setting Name

Description

5

194

MULTIMEDIA

Display

After pressing the Display button on the touchscreen, the following settings will be available:

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Language

This setting will change the language of the Uconnect system and Instrument

Cluster Display. The available languages are English, Français, Español, and

Italiano.

Display Mode

This setting will allow you to set the brightness manually or have the system

set it automatically. The “Auto” setting has the system automatically adjust

the display brightness. The “Manual” setting will allow the user to adjust the

brightness of the display.

Display Brightness With Headlights ON/Brightness

This setting will allow you to set the brightness when the headlights are on. To

access this setting, Display Mode must be set to Manual. The “+” setting will

increase the brightness; the “-” will decrease the brightness.

Display Brightness With Headlights OFF/Brightness

This setting will allow you to set the brightness when the headlights are off. To

access this setting, Display Mode must be set to Manual. The “+” setting will

increase the brightness; the “-” will decrease the brightness.

Set Theme/Theme Mode

This setting will allow you to change the theme of the radio.

Units

This setting changes the “Speed” (MPH or km/h), “Distance” (mi or km), “Fuel

Consumption” (MPG [US], MPG [UK], L/100 km, or km/L), “Pressure” (psi,

kPa, or bar), “Temperature” (°C or °F), and “Current Consumption” (MPG

[US], MPG [UK], L/100 km, or km/L) units of measurement independently.

Touchscreen Beep

This setting will allow you to turn the touchscreen beep on or off.

Show Main Category Bar Labels

This setting will allow the main category bar labels to be shown on or off.

MULTIMEDIA

195

Safety & Driving Assistance

Control Screen Timeout

This setting allows you to set the Control Screen to turn off automatically after

five seconds or stay open until manually closed.

Navigation Next Turn Displayed in Cluster

This setting will display navigation prompts in the Instrument Cluster Display.

Phone Pop-Ups Displayed In Cluster

This setting will display smartphone notifications and messages in the

Instrument Cluster Display.

Ready To Drive Pop-Ups

This setting will enable the Ready To Drive Pop-Ups in the Instrument

Cluster Display.

Setting Name

Description

After pressing the Safety & Driving Assistance button on the touchscreen, the following settings will be available:

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Forward Collision Warning Sensitivity — Located In Automatic Emergency

Braking Submenu

This setting will change the distance at which the Forward Collision Warning

(FCW) alert sounds. The “Medium” setting will have the FCW system signal

when an object is in view, and the possibility of a collision is detected. The

“Near” setting will have the FCW system signal when the object is closer to the

vehicle. The “Far” setting will have the FCW system signal when an object is at

a far distance from the vehicle.

Forward Collision Warning — Located In Automatic Emergency Braking

Submenu

This setting will turn the Forward Collision Warning system on or off. The “Off”

setting will deactivate the FCW system. The “Warning Only” setting will provide

only an audible chime when a collision is detected. The “Warning + Active

Braking” setting will provide an audible chime and apply some brake pressure

when a collision is detected.

5

196

MULTIMEDIA

Pedestrian Emergency Braking — Located In Automatic Emergency Braking

Submenu

This setting will turn the Pedestrian Emergency Braking system “Off” or

“Warning + Active Braking”.

LaneSense Warning — Located In LaneSense Submenu

This setting will change the distance at which the steering wheel will provide

lane departure feedback. The available settings are “Early”, “Medium”, and

“Late”.

LaneSense Strength — Located In LaneSense Submenu

This setting will change the strength of the steering wheel feedback during a

lane departure. The available settings are “Low”, “Medium”, and “High”.

ParkSense

This setting will change the type of ParkSense alert when a close object is

detected. The “Sound Only” setting will provide an audible chime when an

object is detected. The “Sound and Display” setting will provide both an

audible chime and a visual display when an object is detected.

Front ParkSense Volume

This setting adjusts the volume of the Front ParkSense system. The available

settings are “Low”, “Medium”, and “High”.

Rear ParkSense Volume

This setting adjusts the volume of the Rear ParkSense system. The available

settings are “Low”, “Medium”, and “High”.

Rear ParkSense Braking Assist

This setting will turn the Rear ParkSense Braking Assist on or off.

Sliding Door Alert

This setting will turn the Sliding Door Alert on and off.

Blind Spot Alert

This setting will change the type of alert provided when an object is detected

in a vehicle’s blind spot. The “Off” setting will turn off Blind Spot Alert. The

“Lights” setting will activate the Blind Spot Alert lights on the outside mirrors.

The “Lights + Chime” setting will activate both the lights on the outside

mirrors and an audible chime.

Hill Start Assist

This setting will turn the Hill Start Assist system on or off.

KeySense

This setting will access KeySense features.

Setting Name

Description

MULTIMEDIA

197

Clock & Date

After pressing the Clock & Date button on the touchscreen, the following settings will be available:

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Sync Time With GPS

This setting will sync the time to the GPS receiver in the system. The system

will control the time via the GPS location.

Set Time

This setting will allow you to manually set the time of your clock.

Time Format

This setting will allow you to set the time format (AM/PM). Sync Time With GPS

must be off for this setting to be available. The “12 hrs” setting will set the

time to a 12-hour format. The “24 hrs” setting will set the time to a

24-hour format.

Set Date

This setting will allow you to set the date by day, month, and year

(DD/MM/YY).

Set Time Hours

This setting will allow you to set the hours. Sync Time With GPS must be off for

this setting to be available. The “+” setting will increase the hours. The “-”

setting will decrease the hours.

Set Time Minutes

This setting will allow you to set the minutes. Sync Time With GPS must be off

for this setting to be available. The “+” setting will increase the minutes.

The “-” setting will decrease the minutes.

Show Time in Status Bar

This setting will place the time in the radio’s status bar.

5

198

MULTIMEDIA

Phone/Bluetooth®

When the Phone/Bluetooth® button is pressed on the touchscreen, the system displays the options related to Bluetooth® connectivity from an external audio

device or smartphone. The list of paired audio devices or smartphones can be accessed from this menu.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Device Manager

This setting will open the Device Manager main screen.

Do Not Disturb

This setting will open the Do Not Disturb settings menu. The settings are “Auto

Reply” (both, text, call), “Auto Reply Message” (custom, default), and “Custom

Auto Reply Message” (create message).

Do Not Disturb All

This setting will open the “Do Not Disturb All” settings menu. The available

options are “On” and “Off”.

Enable Two Active Phones

This setting will enable or disable two active phones with the vehicle.

The setting options are “On” and “Off”.

Phone Pop-Ups Displayed In Cluster

This setting will activate phone message pop-ups in the Instrument

Cluster Display.

MULTIMEDIA

199

Voice — If Equipped

After pressing the Voice button on the touchscreen, the following settings will be available:

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Voice Options

This setting will allow you to change the voice options for the radio to

“Male” or “Female”.

Wake Up Word

This setting will allow you to turn the voice recognition “Wake Up” word

on or off.

Voice Barge-In

This setting will allow you to turn the voice recognition barge-in feature

on or off.

Show Command List

This setting will allow you to turn the Command List on or off. The “Always”

setting will always show the Command List. The “With Help” setting will show

the Command List and provide a brief description of what the command does.

The “Never” setting will turn the Command List off.

5

200

MULTIMEDIA

Navigation — If Equipped

Camera

When the Navigation button is pressed on the touchscreen, the system displays options related to the vehicle’s built-in Navigation system. These settings can

change which icons display on the map, how “time to arrival is calculated”, and route types.
For more information on Navigation and settings, refer to your Uconnect Owner’s Manual Supplement.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

When the Camera button is pressed on the touchscreen, the system displays the options related to the vehicle’s camera features.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Surround View Camera Delay

This setting will add a timed delay to the Surround View Camera when shifting

out of REVERSE.

Surround View Camera Guidelines

This setting will turn the Surround View Camera Guidelines on or off.

ParkView Backup Camera Delay

This setting will add a timed delay to the ParkView Backup Camera when

shifting out of REVERSE.

ParkView Backup Camera Active Guidelines

This setting will turn the ParkView Backup Camera Active Guidelines on or off.

ParkView Backup Camera Fixed Guidelines

This setting will turn the ParkView Backup Camera Fixed Guidelines on or off.

MULTIMEDIA

201

Mirrors & Wipers

When the Mirrors & Wipers button is pressed on the touchscreen, the system displays the options related to the vehicle’s mirrors and wipers.

NOTE:

Depending on the vehicle’s options, feature settings may vary.

Setting Name

Description

Tilt Side Mirrors In Reverse

This setting will tilt the outside side-view mirrors when the ignition is in the

ON/RUN position and the transmission gear selector is in the REVERSE

position. The mirrors will move back to their previous position when the

transmission is shifted out of REVERSE. The available settings are “On”

and “Off”.

Auto Folding Side Mirrors

This setting will automatically fold and unfold the side-view mirrors when the

vehicle is turned off, the doors are locked, or the key fob button is pushed.

The available options are “On” and “Off”.

Rain Sensing Auto Wipers

This setting will turn the Rain Sensing Auto Wipers on or off.

Headlights With Wipers

This setting will turn the headlights on when the wipers are activated.

5