Chrysler Town, Dodge Caravan. Manual — part 7
Miles
108, 000
111, 000
114, 000
117, 000
120, 000
(Kilometers)
(173 000)
(178 000)
(182 000)
(187 000)
(192 000)
Change engine oil and engine oil filter.
X
X
X
X
X
Inspect the brake linings.
X
X
Inspect the engine air cleaner filter, replace
if necessary. *
X
X
X
X
Replace the engine air cleaner filter.
X
Replace the spark plugs
on 2.4 liter
engines.
X
Replace the ignition cables
on 2.4 liter
engines.
X
Inspect and adjust the power steering pump
belt tension on 2.4 liter engines.
X
Inspect the generator belt on 2.4 liter
engines, replace if necessary.
X
Inspect engine accessory drive belts on 3.3
liter and 3.8 liter engines, replace if
necessary. ‡
X
Inspect the tie rod ends and boot seals.
X
Inspect the PCV valve
and replace as
necessary.*
X
Change the All Wheel Drive (AWD) power
transfer unit fluid. (See note at the end of
this chart)
X
Replace the air conditioning filter.
X
X
* This maintenance is recommended by the manu-
facture to the owner but is not required to maintain
the emissions warranty.
‡ This maintenance is not required if previously
replaced.
Inspection and service should also be performed
anytime a malfunction is observed or suspected.
Retain all receipts.
NOTE: The AWD power transfer unit fluid and the
AWD overrunning clutch/ rear carrier fluid must be
changed at the more frequent intervals shown in
schedule B if the vehicle is operated under any of
the conditions noted by a diamond at the beginning
of the schedule.
0 - 12
LUBRICATION & MAINTENANCE
RS
MAINTENANCE SCHEDULES (Continued)
SCHEDULE “A”
Miles
6, 000
12, 000
18, 000
24, 000
30, 000
36, 000
(Kilometers)
(10 000)
(19 000)
(29 000)
(38 000)
(48 000)
(58 000)
[Months]
[6]
[12]
[18]
[24]
[30]
[36]
Change engine oil and engine
oil filter.
X
X
X
X
X
X
Inspect the brake linings.
X
X
Inspect the engine air cleaner
filter, replace if necessary. *
X
X
X
X
X
Replace the engine air
cleaner filter.
X
Replace the spark plugs
on
2.4 liter engines.
X
Inspect the tie rod ends and
boot seals.
X
Inspect and adjust the power
steering pump belt tension on
2.4 liter engines.
X
Replace the air conditioning
filter.
X
X
X
Miles
42, 000
48, 000
54, 000
60, 000
66, 000
72, 000
(Kilometers)
(67 000)
(77 000)
(86 000)
(96 000)
(106 000)
(115 000)
[Months]
[42]
[48]
[54]
[60]
[66]
[72]
Change engine oil and engine oil filter.
X
X
X
X
X
X
Inspect the brake linings.
X
X
Inspect the engine air cleaner filter, replace
if necessary. *
X
X
X
X
X
Replace the engine air cleaner filter.
X
Replace the spark plugs
on 2.4 liter
engines.
X
Replace the ignition cables
2.4 liter
engines.
X
Inspect and adjust the power steering pump
belt tension on 2.4 liter engines.
X
Inspect the tie rod ends and boot seals.
X
Inspect the generator belt on 2.4 liter
engines, replace if necessary.
X
X
Check the PCV valve
and replace, if
necessary.*
X
Inspect the serpentine drive belt on 3.3 liter
and 3.8 liter engines, replace if necessary. ‡
X
X
Flush and replace the engine coolant at 60
months, regardless of mileage.
X
Replace the air conditioning filter.
X
X
X
RS
LUBRICATION & MAINTENANCE
0 - 13
MAINTENANCE SCHEDULES (Continued)
Miles
78, 000
84, 000
90, 000
96, 000
100, 000
(Kilometers)
(125 000)
(134 000)
(144 000)
(154 000)
(160 000)
[Months]
[78]
[84]
[90]
[96]
Change engine oil and engine oil filter.
X
X
X
X
Inspect the brake linings.
X
Inspect the engine air cleaner filter, replace
if necessary. *
X
X
X
X
Replace the engine air cleaner filter.
X
Replace the spark plugs
on 2.4 liter
engines.
X
Inspect the tie rod ends and boot seals.
X
Inspect and adjust the power steering pump
belt tension on 2.4 liter engines.
X
Inspect the generator belt on 2.4 liter
engines, replace if necessary.
X
Check and replace the PCV valve
, if
necessary.*
X
Inspect the serpentine drive belt on 3.3 liter
and 3.8 liter engines, replace if necessary. ‡
X
Replace the spark plugs
3.3 liter and 3.8
liter engines.
X
Replace the ignition cables
3.3 liter and
3.8 liter engines.
X
Flush and replace the engine coolant at
100,000 miles, if not done at 60 months.
X
Replace the air conditioning filter.
X
X
Miles
102, 000
108, 000
114, 000
120, 000
(Kilometers)
(163 000)
(173 000)
(182 000)
(192 000)
[Months]
[102]
[108]
[114]
[120]
Change engine oil and engine oil filter.
X
X
X
X
Inspect the brake linings.
X
Inspect the engine air cleaner filter, replace if necessary. *
X
X
X
Replace the engine air cleaner filter.
X
Replace the spark plugs
on 2.4 liter engines.
X
Replace the ignition cables
2.4 liter engines.
X
Inspect and adjust the power steering pump belt tension
on 2.4 liter engines.
X
Inspect the tie rod ends and boot seals.
X
Check the PCV valve
and replace, if necessary.*
X
Inspect the serpentine drive belt on 3.3 liter and 3.8 liter
engines, replace if necessary. ‡
X
Replace the engine timing belt
on 2.4 liter engines
only.
X
Replace the air conditioning filter.
X
X
0 - 14
LUBRICATION & MAINTENANCE
RS
MAINTENANCE SCHEDULES (Continued)
* This maintenance is recommended by the manu-
facture to the owner but is not required to maintain
the emissions warranty.
‡ This maintenance is not required if previously
replaced.
Inspection and service should also be performed
anytime a malfunction is observed or suspected.
Retain all receipts.
WARNING: You can be badly injured working on or
around a motor vehicle. Do only that service work
for which you have the knowledge and the right
equipment. If you have any doubt about your ability
to perform a service job, take your vehicle to a
competent mechanic.
HOISTING
STANDARD PROCEDURE - HOISTING
Refer to Owner’s Manual provided with vehicle for
proper emergency jacking procedures.
WARNING: THE HOISTING AND JACK LIFTING
POINTS PROVIDED ARE FOR A COMPLETE VEHI-
CLE. WHEN THE ENGINE OR REAR SUSPENSION
IS REMOVED FROM A VEHICLE, THE CENTER OF
GRAVITY IS ALTERED MAKING SOME HOISTING
CONDITIONS UNSTABLE. PROPERLY SUPPORT OR
SECURE VEHICLE TO HOISTING DEVICE WHEN
THESE CONDITIONS EXIST.
CAUTION: Do not position hoisting device on any
suspension component, including the front suspen-
sion crossmember, the rear leaf springs, and the
rear axle. Do not hoist on the front and rear
bumpers, the lower liftgate crossmember, the lower
radiator crossmember, the down standing flanges
on the sill or the front engine mount.
FOR PROPER HOIST PLACEMENT REFER
TO (Fig. 5).
The
hoisting
points
are
identified
by
S.A.E.
inverted triangle hoisting symbols (Fig. 5). The front
hoisting points are at the bottom of the font rail
below the hoisting symbol approximately 250 mm
behind the front suspension crossmember. When
using outboard lift hoists, verify that the hoist lift
pads have been properly adjusted to eliminate con-
tact between the hoist arm and the down standing
flange on the sill. The rear hoisting points are the
leaf spring front mounting brackets. The hoist pad
must be positioned to pick up the flanges on the
bracket, not the leaf spring.
When servicing the leaf springs or the leaf spring
mounting brackets, special provisions are required to
support the rear of the vehicle. Position the rear
hoist pads under the horizontal surface on the bot-
tom of the sill, inboard adjacent to the flange and
centered fore/aft between the jacking indicator tabs
on the lower flange. DO NOT HOIST ON THE
FLANGE. Place a soft pad between the hoist and the
painted surface on the sill to avoid scratching the fin-
ish.
JUMP STARTING
STANDARD PROCEDURE - JUMP STARTING
WARNING: REVIEW ALL SAFETY PRECAUTIONS
AND WARNINGS. (Refer to 8 - ELECTRICAL/BAT-
TERY
SYSTEM/BATTERY
-
STANDARD
PROCE-
DURE).
WARNING: DO NOT JUMP START A FROZEN BAT-
TERY, PERSONAL INJURY CAN RESULT.
Fig. 5 HOISTING AND JACKING POINTS
1- DRIVE ON LIFT
2 - FRAME CONTACT LIFT (SINGLE POST)
2 - CHASSIS LIFT (NON-AXLE DUAL POST)
2 - OUTBOARD LIFT (DUAL POST)
2 - FLOOR JACK
3 - S.A.E. HOISTING SYMBOLS
RS
LUBRICATION & MAINTENANCE
0 - 15
MAINTENANCE SCHEDULES (Continued)
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст