Chrysler Crossfire. Manual — part 939
SEAT
REMOVAL
1. Move the seat (1) all the way back to its lock posi-
tion.
2. Pull the plastic front covering (3) from the seat
tracks.
3. Remove the two front seat track bolts (2).
4. Move the seat all the way forward to its lock posi-
tion.
5. Remove the bolt (2) on the seat track for the seat
belt mounting.
6. Remove the belt end from the seat adjuster.
7. Remove the rear two bolts (1) attaching the seat
track to the floor.
8. Disconnect the electrical connectors for the seat
heater and the electrical seat adjustment.
9. Move the seat backward, lift up and then remove
from the vehicle.
ZH
SEATS
23 - 427
INSTALLATION
1. Install the seats into the vehicle.
2. Connect the electrical connectors for the seat
heater and the electrical seat adjustment.
3. Insert the bolts (1) in the bolt holes in the rear of
the seat track.
4. Tighten the two rear seat track bolts (1). Tighten to
50 N·m (37 ft. lbs.).
5. Install the belt end fitting to the seat adjuster.
Note: Tighten the bolt for the belt end fitting only
so that it can be moved.
6. Install the bolt (2) at the belt end fitting. Tighten to
35 N·m (26 ft. lbs.).
7. Move the seat all the way backwards.
8. Install the two front seat track bolts (2). Tighten to
50 N·m (37 ft. lbs.).
9. Install the plastic covering (3) to the seat tracks.
23 - 428
SEATS
ZH
SEAT BACK
REMOVAL
REMOVAL - SEAT BACK
1. Remove the front seat. (Refer to 23 - BODY/
SEATS/SEAT - REMOVAL).
2. Remove the seat cushion. (Refer to 23 - BODY/
SEATS/SEAT CUSHION - REMOVAL).
3. Loosen the bolt on the seat height adjustment by
removing the left and right bolts (2).
4. Remove the bolts (1) from the seat back.
5. Disconnect the seat back heater and adjustment
electrical connectors.
6. Remove the seat back from the frame.
REMOVAL - PLASTIC BACK COVER
1. Remove the cover on the seat back (only down to
step 6). (Refer to 23 - BODY/SEATS/SEAT BACK
COVER - REMOVAL).
Note: Use T25 Torx socket.
2. Remove the screws (1) on left and right sides.
3. Unhook the plastic back cover at the top of the
seat back frame (2) and remove it from the seat
back frame.
ZH
SEATS
23 - 429
INSTALLATION
INSTALLATION - SEAT BACK
1. Install the seat back to the frame.
2. Connect the seat back heater and adjustment elec-
trical connectors.
3. Install the bolts (1) to the seat back. Tighten to 35
N·m (26 ft. lbs.).
4. Install the seat height adjustment by installing the
left and right bolts (2). Tighten to 24 N·m (18 ft.
lbs.).
5. Install the seat cushion. (Refer to 23 - BODY/
SEATS/SEAT CUSHION - INSTALLATION).
6. Install the front seat. (Refer to 23 - BODY/SEATS/
SEAT - INSTALLATION).
INSTALLATION - PLASTIC BACK COVER
1. Install the plastic back cover on the top of the seat
back frame (2).
2. Install the screws (1) on left and right sides.
3. Install the cover on the seat back. (Refer to 23 -
BODY/SEATS/SEAT
BACK
COVER
-
INSTALLATION).
23 - 430
SEATS
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст