Chrysler Crossfire. Manual — part 919

5. Install the lower instrument panel (3). (Refer to 23 -

BODY/INSTRUMENT

PANEL/INSTRUMENT

PANEL ASSEMBLY - INSTALLATION).

6. Install the side air nozzle.

INSTALLATION - DRAWER

1. Install the glove compartment drawer on the hinges

(2).

2. Install the clip at the bottom of the retaining strap

(3) and hook the retaining strap.

3. Install the damper shock (1).

4. Install the insert clip to the damper shock (1).

ZH

INSTRUMENT PANEL

23 - 347

5. Connect the retaining rail (1) for the interior cover-

ing at the top.

6. Close the glove compartment door.

7. Check the adjustment of the glove compartment

door and adjust, if necessary. (Refer to 23 - BODY/
INSTRUMENT PANEL/GLOVE BOX - STANDARD
PROCEDURE).

23 - 348

INSTRUMENT PANEL

ZH

INSTRUMENT PANEL ASSEMBLY

REMOVAL

REMOVAL - INSTRUMENT PANEL (TOP SECTION)

1. Remove the A-pillar trim (1).

CAUTION: Damage to the top section of instru-
ment panel can occur if the A-pillar sheet metal
clips are not removed when removing and install-
ing the top section of the instrument panel.

2. Remove the sheet metal clips (1) on left and right

A-pillars.

ZH

INSTRUMENT PANEL

23 - 349

Note: A plastic wedge or a suitable coin can be
used to turn the fuse cover locks.

3. Remove the fuse cover (1) on the left and the I/P

cover on the right.

4. Remove the right and left air deflectors.

5. Remove the screw located behind the right and left

air deflectors (2).

6. Remove the screws (1) on left and right of the

instrument panel located on the inside of the fuse
cover and the I/P cover.

23 - 350

INSTRUMENT PANEL

ZH