Chrysler Crossfire. Manual — part 708
INSTALLATION
INSTALLATION
1. Install the idler arm bushing to the idler arm (4).
2. Adjust the idler arm bushing to the reference dimension.
3. Install the idler arm pinch bolt. Tighten to 30 N·m (22 ft. lbs.).
4. Install the idler arm to the vehicle.
5. Install the nut and bolt on the idler arm. Tighten to 50 N·m (37 ft. lbs.).
6. Install the heat shield (2).
7. Install the drag link to the idler arm. Tighten to 50 N·m (37 ft. lbs.).
ZH
LINKAGE
19 - 51
INSTALLATION - RHD
1. Install the idler arm bushing (1) to the idler arm.
2. Adjust the idler arm bushing (1) to the reference dimension.
3. Install the idler arm pinch bolt. Tighten to 30 N·m (22 ft. lbs.).
4. Install the idler arm (2) to the vehicle.
5. Install the nut and bolt (1) on the idler arm. Tighten to 50 N·m (37 ft. lbs.).
6. Install the heat shield (4).
7. Install the drag link (3) to the idler arm (2). Tighten to 50 N·m (37 ft. lbs.).
19 - 52
LINKAGE
ZH
PITMAN ARM
REMOVAL
REMOVAL
1. Using Special Tool 9168 Ball Joint Puller remove
the drag link from the pitman arm.
2. Measure the distance of point
9
A
9
between the pit-
man arm (2) and the steering gear (1) using a cal-
iper gauge.
ZH
LINKAGE
19 - 53
3. Remove the snap ring (2) that holds the pitman
arm (1) on the shaft.
4. Remove the pitman arm by loosening the pinch
bolt (1). With a prying device, remove the pitman
arm from the pitman arm shaft (2).
19 - 54
LINKAGE
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст