Chrysler Crossfire. Manual — part 136
CHARGE AIR COOLER CIRCULATION PUMP
DESCRIPTION
The charge air cooler circulation pump is mounted to the side of the charge air cooler radiator. The pump is used
to circulate coolant between the charge air cooler radiator and the charge air cooler. The pump is a positive dis-
placement pump, that operates on a pulsed 12 volt signal.
OPERATION
The charge air cooler circulation pump operates independently of the engine cooling system. The only common link
is the coolant reservoir. The circulation pump is operated by a pulsed 12 volt signal.
ZH
ENGINE
7 - 79
REMOVAL
1. Remove the right front inner fender lining in order
to gain access to the charge air cooler circulation
pump.
2. Remove the charge air cooler circulation pump inlet
hose (2).
3. Remove the charge air cooler circulation pump out-
let hose (1).
4. Disconnect the charge air cooler circulation pump
harness connector (2).
5. Remove the charge air cooler circulation pump
mounting bolt (1).
6. Remove the charge air cooler circulation pump
from the mounting bracket.
7 - 80
ENGINE
ZH
INSTALLATION
1. Install the charge air cooler circulation pump to the
mounting bracket.
2. Install the charge air cooler circulation pump
mounting bolt (1). Tighten the mounting bolt to 20
N·m (15 ft. lbs.).
3. Reconnect the charge air cooler circulation pump
harness connector (2).
4. Reconnect the charge air cooler circulation pump
inlet hose (2).
5. Reconnect the charge air cooler circulation pump
outlet hose (1).
6. Refill the cooling system. (Refer to 7 - COOLING/
ENGINE/COOLANT - STANDARD PROCEDURE).
7. Start the engine and check for coolant leaks.
8. Install the right side inner fender lining.
9. Recheck the coolant level.
ZH
ENGINE
7 - 81
ACCESSORY DRIVE
TABLE OF CONTENTS
page
page
ACCESSORY DRIVE
. . . . . . . . . . . . . . . . . . . . . . . . . 82
. . . . . . . . . . . . . . . . . . . . . . . . . 82
. . . . . . . . . . . . . . . . . . . . 83
. . . . . . . . . . . . . . . . . . . 83
. . . . . . . . . . . . . . . . . . . . . . . 83
BELT TENSIONER
. . . . . . . . . . . . . . . . . . . . . . . . . . . 84
. . . . . . . . . . . . . . . . . . . . . . 85
. . . . . . . . . . . . . . . . . . . . . . . 87
. . . . . . . . . . . . . . . . . . 89
DRIVE BELT
. . . . . . . . . . . . . . . . . . . . . . . . . . . 91
. . . . . . . . . . . . . . . . . . . . . . 92
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
. . . . . . . . . . . . . . . . . . . . . . . . . . 94
. . . . . . . . . . . . . . . . . . . . . . . 94
. . . . . . . . . . . . . . . . . . 96
IDLER PULLEY
. . . . . . . . . . . . . . . . . . . . . . . . . . . 98
REMOVAL - SUPERCHARGER IDLER (SRT)
. . . . . . . . . . . . . . . . . . . . . . 103
INSTALLATION - IDLER PULLEY (SRT)
INSTALLATION - SUPERCHARGER IDLER
(SRT) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
ACCESSORY DRIVE
DESCRIPTION
A single, serpentine style belt drives all of the engine accessories. The accessory drive includes an automatic ten-
sioner, making adjustments unnecessary for the life of the belt.
OPERATION
OPERATION
The accessory drive belt provides the link between the
engine crankshaft and the engine accessories. Ten-
sion on the accessory drive belt is maintained by an
automatic belt tensioner.
1. Crankshaft
2. A/C Compressor
3. Power Steering Pump
4. Idler Pulley
5. Generator
6. Water Pump
7. Tensioner
7 - 82
ACCESSORY DRIVE
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст