Chrysler Crossfire. Manual — part 698
7. Remove the instrument cluster (1). (Refer to 8 -
ELECTRICAL/INSTRUMENT
CLUSTER
-
REMOVAL).
8. Remove the steering lock. (Refer to 19 - STEER-
ING/COLUMN/KEY/LOCK
CYLINDER
-
REMOVAL).
9. Remove the speed control switch (1). (Refer to 8 -
ELECTRICAL/SPEED
CONTROL/SWITCH
-
REMOVAL).
10. Remove the multifunction switch screws (1-2).
(Refer to 8 - ELECTRICAL/LAMPS/LIGHTING -
EXTERIOR/MULTI-FUNCTION
SWITCH
-
REMOVAL).
11. Remove the column trim ring.
ZH
COLUMN
19 - 11
12. Remove the pinch bolt (1) attaching the steering
column to the steering gear.
13. Remove the lower nuts on the steering column
attaching the steering column to the lower mount-
ing surface.
14. Remove the upper bolts (1) on the steering col-
umn attaching it to the instrument panel support.
CAUTION: DO NOT use force as the intermediate
shaft is sensitive to the effects of side force.
15. Pull the steering column out away from the instru-
ment panel.
19 - 12
COLUMN
ZH
REMOVAL - RHD
WARNING: BEFORE SERVICING THE STEERING COLUMN THE AIRBAG SYSTEM MUST BE DISARMED.
FAILURE TO DO SO MAY RESULT IN ACCIDENTAL DEPLOYMENT OF THE AIRBAG AND POSSIBLE PER-
SONAL INJURY.
1. Disconnect the negative battery cable.
2. Remove the right lower I/P panel from under the
steering column. (Refer to 23 - BODY/INSTRU-
MENT PANEL/INSTRUMENT PANEL ASSEMBLY -
REMOVAL).
3. Remove the driver airbag. (Refer to 8 - ELECTRI-
CAL/RESTRAINTS/DRIVER AIRBAG - REMOVAL).
4. Position the front wheels in the straight-ahead posi-
tion.
5. Remove the steering wheel bolt (1) and remove the
steering wheel. (Refer to 19 - STEERING/COL-
UMN/STEERING WHEEL - REMOVAL).
ZH
COLUMN
19 - 13
6. Remove the clockspring screws (1). (Refer to 8 -
ELECTRICAL/RESTRAINTS/CLOCKSPRING
-
REMOVAL).
7. Remove the instrument cluster bezel (1). (Refer to
8
-
ELECTRICAL/INSTRUMENT
CLUSTER
-
REMOVAL).
8. Remove the steering lock. (Refer to 19 - STEER-
ING/COLUMN/KEY/LOCK
CYLINDER
-
REMOVAL).
9. Remove the speed control switch retaining screw
(1) and the speed control switch. (Refer to 8 -
ELECTRICAL/SPEED
CONTROL/SWITCH
-
REMOVAL).
10. Remove the multifunction switch retaining screws
(1-2) and the multifunction switch. (Refer to 8 -
ELECTRICAL/LAMPS/LIGHTING
-
EXTERIOR/
MULTI-FUNCTION SWITCH - REMOVAL).
11. Remove the column trim ring.
19 - 14
COLUMN
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст