Chrysler Crossfire. Manual — part 908
4. Remove the bolts (3) on the lower rear portion of the fender.
5. Remove the screw (5) on the top front of the fender.
6. Remove the four bolts (1) attaching the fender to the inner support.
7. Remove the front fender (4).
INSTALLATION
1. Position the front fender (4).
2. Install the four bolts (1) attaching the fender to the inner support.
3. Install the screw (5) on the top front of the fender.
4. Install the bolts (3) on the lower portion of the rear of the fender.
5. Install the bolts (2) on the fender attaching it to the A-pillar.
6. Install the front fascia (6). (Refer to 13 - FRAME & BUMPERS/BUMPERS/FRONT FASCIA - INSTALLATION).
7. Close the hood (7).
8. Align the fender. (Refer to 23 - BODY/BODY STRUCTURE/GAP AND FLUSH - SPECIFICATIONS).
ZH
EXTERIOR
23 - 303
LF WHEELHOUSE SPLASH SHIELD
REMOVAL
1. Remove the left front tire and wheel assembly.
2. Remove the five plastic retainer nuts and the five
retainer screws from the wheelhouse splash shield.
3. Remove the two retaining screws from the lower
side of the rocker panel.
4. Remove the splash shield from the vehicle.
INSTALLATION
1. Install the splash shield onto the vehicle.
2. Install the two retaining screws from the lower side
of the rocker panel.
3. Install the five plastic retainer nuts and the five
retainer screws from the wheelhouse splash shield.
4. Install the left front tire and wheel assembly. (Refer
to
22
-
TIRES/WHEELS
-
STANDARD
PROCEDURE).
23 - 304
EXTERIOR
ZH
RF WHEELHOUSE SPLASH SHIELD
REMOVAL
1. Remove the right front tire and wheel assembly.
2. Remove the five plastic retainer nuts and the five
retainer screws from the wheelhouse splash shield.
3. Remove the two retaining screws from the lower
side of the rocker panel.
4. Remove the splash shield from the vehicle.
INSTALLATION
1. Install the splash shield onto the vehicle.
2. Install the two retaining screws from the lower side
of the rocker panel.
3. Install the five plastic retainer nuts and the five
retainer screws from the wheelhouse splash shield.
4. Install the right front tire and wheel assembly.
ZH
EXTERIOR
23 - 305
COWL GRILLE
REMOVAL
1. Remove the windshield wiper arm plastic caps,
then remove the nuts (1) and the wiper arms.
2. Remove the seven screws (2) from the cowl grille.
3. Pull back on the cowl grille to release the clips (3)
and remove the hoses and connections from the
underside of the cowl grille, then remove the cowl
grille from the vehicle.
INSTALLATION
1. Install the hoses and connections to the underside
of the cowl grille, then install the cowl grille to the
vehicle, engaging the clips on the back side of the
cowl grille.
2. Install the seven screws to the front of the cowl
grille.
3. Install the windshield wiper arms, nuts and plastic
caps.
23 - 306
EXTERIOR
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст