Chrysler Crossfire. Manual — part 244
Note: The tool symbol appears for 10 seconds
together with the current remaining mileage.
1. Press the left control dial (3) on the Instrument
Cluster twice within a one second period.
RESETTING THE FSS MAINTENANCE INDICATOR
The FSS maintenance indicator can be reset to the
total mileage (1) or total time in two ways:
1. Automatically when the odometer (1) is reset to
0 within the first 155 miles. (The FSS maintenance
indicator is reset to the values set at the factory).
2. Manually by the driver.
ZH
INSTRUMENT CLUSTER - SERVICE INFORMATION
8J - 101
Perform the following to manually reset the FSS main-
tenance indicator:
1. Hold the left control dial (3) depressed.
2. Simultaneously move the ignition switch to the
“RUN” position (3).
3. Continue to hold the control dial (3) down for 10
seconds. After the audible tone, 15000 km (7,500
miles) appears on the display. The remaining mile-
age (1) is displayed again.
8J - 102
INSTRUMENT CLUSTER - SERVICE INFORMATION
ZH
RESETTING THE FSS MAINTENANCE INDICATOR AFTER AN OIL CHANGE
1. Move the ignition switch to the “RUN” position (3).
2. Within 4 seconds of moving the ignition switch into
the “RUN” position, press the reset button for the
trip odometer (3) twice within one second. The dis-
play for the FSS service request (1) is activated for
10 seconds.
ZH
INSTRUMENT CLUSTER - SERVICE INFORMATION
8J - 103
3. During the 10 seconds the FSS service request is
displayed, move the ignition switch to the “OFF”
position (1). The FSS service request will continue
to be displayed.
4. Press the reset button (3) for the trip odometer (1)
and hold.
5. Move the ignition switch to the “RUN” position (3).
8J - 104
INSTRUMENT CLUSTER - SERVICE INFORMATION
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст