Chrysler Crossfire. Manual — part 911
INSTALLATION
INSTALLATION - SPOILER WING
1. Install the rear spoiler wing (2) onto the spoiler link-
age. Tighten to 8 N·m (71 in. lbs.).
2. Install the four screws (1) attaching the rear spoiler
wing the linkage.
3. Move the spoiler to its down position verifying the
spoiler wings alignment to the vehicle’s body.
ZH
EXTERIOR
23 - 315
INSTALLATION - MOUNTING PLATE
1. Install the mounting bracket to the mounting plate.
Tighten to 8 N·m (71 in. lbs.).
2. Install the mounting plate to the rear liftgate.
3. Install the sixteen mounting nuts (1) attaching the
mounting plate to the rear liftgate. Tighten to 2.5
N·m (19 in. lbs.).
4. Install the two mounting nuts (2) attaching the
mounting plate to the rear liftgate. Tighten to 2.5
N·m (19 in. lbs.).
5. Install the two drain tubes.
23 - 316
EXTERIOR
ZH
6. Connect the spoiler electrical connections (1).
7. Install the lower trim panel (1). (Refer to 23 -
BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/
TRIM PANEL - INSTALLATION).
ZH
EXTERIOR
23 - 317
8. Install the spoiler wing (2) to the linkage (1). (Refer
to
23
-
BODY/EXTERIOR/SPOILER
-
INSTALLATION).
9. Verify the rear spoiler operation by using the man-
ual override switch to operate the spoiler making
sure
there
is
smooth
operation
and
proper
alignment.
23 - 318
EXTERIOR
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст