Chrysler Crossfire. Manual — part 286
TRANS RANGE INDICATOR ILLUMINATION
DESCRIPTION
The transmission range indicator is illuminated with
LEDs whenever the headlamps or marker lamps are
on. The lamp brightness is adjustable with the dimmer
switch located in the instrument cluster. The transmis-
sion range indicator LEDs cannot be adjusted or
repaired. If faulty or damaged, the entire transmission
range indicator assembly must be replaced as a unit.
For complete transmission range indicator removal
procedures, see shift mechanism removal in the auto-
matic transmission section.(Refer to 21 - TRANSMIS-
SION/TRANSAXLE/AUTOMATIC
-
NAG1/SHIFT
MECHANISM - REMOVAL).
ASH RECEIVER LAMP
REMOVAL
1. Remove the cover on the center console. (Refer to
23
-
BODY/INTERIOR/CENTER
CONSOLE
-
REMOVAL).
ZH
LAMPS/LIGHTING - INTERIOR - SERVICE INFORMATION
8L - 157
2. Remove the screws (1-3) attaching the ashtray (2)
to the center console.
3. Press the ashtray housing (1) to the left and
remove it toward the right (arrows).
4. Disconnect the ashtray harness connector for the
courtesy lamp on the back of the ashtray (1).
5. Remove the ashtray lamp from the ashtray harness
connector.
8L - 158
LAMPS/LIGHTING - INTERIOR - SERVICE INFORMATION
ZH
INSTALLATION
1. Install the ashtray lamp into the ashtray lamp har-
ness connector.
2. Connect the ashtray lamp harness connector to the
ashtray (1).
3. Install the ashtray housing (1) to the right and push
it toward the left.
ZH
LAMPS/LIGHTING - INTERIOR - SERVICE INFORMATION
8L - 159
4. Install the screws (1-3) attaching the ashtray (2) to
the center console.
5. Install the cover (1) on the center console. (Refer
to 23 - BODY/INTERIOR/CENTER CONSOLE -
INSTALLATION).
8L - 160
LAMPS/LIGHTING - INTERIOR - SERVICE INFORMATION
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст