Chrysler Crossfire. Manual — part 671
7. Hold the balance shaft rear counter weight (1) with
a drift, remove the rear retaining bolt (2).
8. Remove the balance shaft rear counter weight (1)
from the balance shaft.
9. Remove the balance shaft locking plate bolt (6) and locking plate at the front of the engine block.
10. Remove the balance shaft (5) from the front of the engine.
ZH
ENGINE - 3.2L SERVICE INFORMATION
9 - 829
INSTALLATION
1. Position the balance shaft (5) into the engine balance shaft bore from the front.
Note: Balance shaft rear retaining bolt (4) must be replaced if length exceeds 50 mm.
2. Install the balance shaft rear counter weight (3) onto the balance shaft (5) and install the rear retaining bolt (4).
Tighten the bolt to 20 N·m (15 ft. lbs.). Rotate the bolt (4) an additional 90°.
3. Install the balance shaft locking plate and locking plate bolt (6). Tighten the balance shaft locking plate bolt to 20
N·m (15 ft. lbs.).
4. Install the crankshaft rear radial oil seal. (Refer to 9 - ENGINE/ENGINE BLOCK/CRANKSHAFT OIL SEAL -
REAR - REMOVAL).
5. Install the timing chain. (Refer to 9 - ENGINE/
VALVE
TIMING/TIMING
BELT/CHAIN
AND
SPROCKETS - INSTALLATION).
9 - 830
ENGINE - 3.2L SERVICE INFORMATION
ZH
6. Install the timing chain cover. (Refer to 9 -
ENGINE/VALVE TIMING/GEAR HOUSING COVER
- INSTALLATION).
7. Remove the Special Tool 9102 Flywheel Locking
Tool (1) from the engine and install the starter.
(Refer to 8 - ELECTRICAL/STARTING/STARTER
MOTOR - INSTALLATION).
ZH
ENGINE - 3.2L SERVICE INFORMATION
9 - 831
TIMING CHAIN GUIDES
REMOVAL
1. Remove the timing chain (1). (Refer to 9 -
ENGINE/VALVE
TIMING/TIMING
BELT/CHAIN
AND SPROCKETS - REMOVAL).
2. Remove the timing chain guides (1) off of the
mounting pins. Inspect and replace worn or dam-
aged guides as required.
INSTALLATION
1. Install the timing chain guides on the mounting pins. Lubricate surface with engine oil.
2. Install the timing chain. (Refer to 9 - ENGINE/VALVE TIMING/TIMING BELT/CHAIN AND SPROCKETS -
INSTALLATION).
9 - 832
ENGINE - 3.2L SERVICE INFORMATION
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст