Chrysler Crossfire. Manual — part 773
13. Attach the shift rod to the transmission shift arm
and install the retaining clip (1).
14. Install the transmission drain plug (2) with a new
gasket (1). Tighten the drain plug to 20 N·m (15 ft.
lbs.).
15. Install the propeller shaft. (Refer to 3 - DIFFER-
ENTIAL & DRIVELINE/PROPELLER SHAFT -
INSTALLATION).
ZH
AUTOMATIC - NAG1 SERVICE INFORMATION
21 - 241
16. Install the lower splash shield and screws (1).
Tighten the screws to 5 N·m (44 in. lbs.).
17. Lower the vehicle.
18. Connect the negative battery cable.
19. Fill the transmission to the specified level with the
specified transmission fluid.
20. Start the engine and check for leaks.
21. Check the transmission fluid level using Special
Tool 8863–A.
21 - 242
AUTOMATIC - NAG1 SERVICE INFORMATION
ZH
SCHEMATICS AND DIAGRAMS
ZH
AUTOMATIC - NAG1 SERVICE INFORMATION
21 - 243
21 - 244
AUTOMATIC - NAG1 SERVICE INFORMATION
ZH
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст