RAM 3500 Chassis Cab (2019 year). Manual — part 33
524 MULTIMEDIA
Trailer Brake
After pressing the “Trailer” button on the touchscreen, the following settings will be available:
NOTE:
Before performing a wheel alignment, the “Wheel Alignment Mode” must be enabled. Refer to an authorized dealer for
further information.
Four Corner Air Suspension
Modes — If Equipped
Tire Jack Mode
Transport Mode
Wheel Alignment Mode
NOTE:
There are four air suspension modes designed to protect the system in unique situations. Tire Jack Mode is selected to assist
in changing a spare tire. Transport Mode is selected to assist when the vehicle is being flat bed towed. Wheel Alignment
Mode is selected before performing a wheel alignment, refer to an authorized dealer for information.
Setting Name
Selectable Options
Setting Name
Selectable Options
Trailer Select
Trailer 1
Trailer 2
Trailer 3
Trailer 4
Trailer Brake Type
Light Electric
Heavy Electric
Light EOH
Heavy EOH
Trailer Name
List of Trailer Names Available
NOTE:
You can select and personalize your trailer name depending on the type of trailer you are hauling. Select the trailer name
from the following list: trailer, boat, car, cargo, dump, equipment, flatbed, gooseneck, horse, livestock, motorcycle, snow
mobile, travel, utility, and 5th wheel.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
525
Audio
After pressing the “Audio” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Balance/Fade
Front
Rear
Left
Right
NOTE:
The “Balance/Fade” feature allows you to adjust the Balance and Fade settings. Press and drag the speaker icon or use the
arrows to adjust, tap the “C” icon to readjust to the center.
Equalizer
+
–
NOTE:
When in the “Equalizer” display you may adjust the Bass, Mid and Treble settings.
Speed
Adjusted
Volume
Off
1
2
3
NOTE:
The “Speed Adjusted Volume” feature increases or decreases volume relative to vehicle speed.
Surround Sound — If
Equipped
On
Off
NOTE:
The “Surround Sound” feature provides simulated surround sound mode.
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
526 MULTIMEDIA
Phone/Bluetooth Settings
After pressing the “Phone/Bluetooth Settings” button on the touchscreen, the following settings will be available:
AUX Volume Offset
— If Equipped
On
Off
NOTE:
The “AUX Volume Offset” feature provides the ability to tune the audio level for portable devices connected through the
AUX input.
Auto Play
On
Off
Setting Name
Selectable Options
Setting Name
Selectable Options
Phone Pop-ups Displayed in Cluster
— If Equipped
On
Off
Do Not Disturb
List of Settings
NOTE:
Press “Do Not Disturb” to access the available settings. The following settings are: Auto Reply (both, text, call), Auto Reply
Message (custom, default) and Custom Auto Reply Message (create message).
Paired Phones and Audio Devices
List Of Paired Phones and Audio Sources
NOTE:
The “Paired Phones and Audio Devices” feature shows which phones and audio sources are paired to the Phone and Audio
Sources Settings system. For further information, refer to the Uconnect Owner’s Manual Supplement.
Smartphone Projection Manager
On
Off
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
527
SiriusXM Setup — If Equipped
After pressing the “SiriusXM Setup” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Tune Start
On
Off
NOTE:
The “Tune Start” feature begins playing the current song from the beginning when you tune to a music channel using one
of the twelve presets, so you can enjoy the complete song. This feature occurs the first time the preset is selected during that
current song. Tune Start works in the background, so you will not even realize it's on, except that you will miss the experience
of joining your favorite song with only a few seconds left to play.
Channel Skip
List of Channels
NOTE:
SiriusXM can be programmed to designate a group of channels that are the most desirable to listen to or to exclude undesir-
able channels while scanning. This feature allows you to select the channels you would like to skip.
Subscription Info
Sirius ID
NOTE:
New vehicle purchasers or lessees will receive a free limited time subscription to SiriusXM Satellite Radio with your radio.
Following the expiration of the free services, it will be necessary to access the information on the Subscription Information
screen to re-subscribe.
1. Press the “Subscription Info” button on the touchscreen to access the Subscription Information screen.
2. Write down the Sirius ID numbers for your receiver. To reactivate your service, either call the number listed on the screen
or visit the provider online.
SiriusXM Travel Link is a separate subscription.
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
528 MULTIMEDIA
Restore Default Settings
After pressing the “Restore Default Settings” button on the touchscreen, the following settings will be available:
System Information
After pressing the “System Information” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Restore Default Settings
Yes
Cancel
NOTE:
When the “Restore Settings” feature is selected it resets clock, audio and other features to their default settings.
Setting Name
Selectable Options
Software License
System Software Information Screen
NOTE:
When the “Software License” feature is selected, a “System Software Information” screen will appear, displaying the system
software version.
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
529
Uconnect 4C NAV With 12–inch Display Settings
Uconnect 4C NAV With 12–inch Display Buttons On The
Touchscreen And Buttons On The Faceplate
Press the “Settings” button on the touchscreen to display the
settings menu screen. In this mode the Uconnect system
allows you to access programmable features that may be
equipped such as Language, Display, Units, Voice, Clock &
Date, Camera, Safety & Driving Assistance, Mirrors and
Wipers, Lights, Doors & Locks, Auto-On Comfort (if
equipped), Engine Off Options, Suspension, Trailer, Audio
Settings, Bluetooth, SiriusXM Setup (if equipped), Reset and
System Information.
NOTE:
Only one category may be selected at a time.
When making a selection, press the button on the touch-
screen to enter the desired mode. Once in the desired mode,
press and release the preferred setting until a check-mark
appears next to the setting, showing that setting has been
selected. Once the setting is complete, press the back arrow
button on the touchscreen to return to the previous menu or
press the “X” button on the touchscreen to close out of the
settings screen. Pressing the Up or Down Arrow buttons on
the touchscreen on the right side of the screen will allow you
to toggle up or down through the list of available settings.
NOTE:
All settings should be changed with the ignition in the RUN
position.
1 — Uconnect Buttons On The Touchscreen
2 — Uconnect Buttons On The Faceplate
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
530 MULTIMEDIA
Language
After pressing the “Language” button on the touchscreen, the following settings will be available:
Display
After pressing the “Display” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Language
English
Espanol
Français
NOTE:
When the “Set Language” feature is selected, you may select one of multiple languages (English / Français / Español) for all
display nomenclature, including the trip functions and the navigation system (if equipped). Press the “Set Language” button
on the touchscreen, then press the desired language button on the touchscreen until a check-mark appears next to the
language, showing that setting has been selected.
Setting Name
Selectable Options
Display Brightness Mode
Auto
Manual
NOTE:
Select Auto or Manual display mode and this allows adjustment of overall screen brightness.
Display Brightness Headlight ON
-
+
NOTE:
To make changes to the "Display Brightness with Headlights ON" setting, the headlights must be on and the interior dimmer
switch must not be in the "party" or "parade" positions.
Display Brightness Headlight OFF
-
+
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
531
NOTE:
To make changes to the "Display Brightness with Headlights OFF" setting, the headlights must be off and the interior dimmer
switch must not be in the "party" or "parade" positions.
Set Theme
Pre-configured Themes
Touchscreen Beep
On
Off
Controls Screen Time-Out — If
Equipped
On
Off
Fuel Saver Display — If Equipped
On
Off
NOTE:
When selected, the system displays fuel saver mode in the instrument cluster.
Navigation Turn-By-Turn Displayed
in Cluster — If Equipped
On
Off
Phone Pop-Ups Displays In Cluster
On
Off
Ready To Drive Pop-Ups — If
Equipped
On
Off
Setting Name
Selectable Options
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
532 MULTIMEDIA
Units — If Equipped
After pressing “Units” on the touchscreen, the following will be available:
Voice
After pressing the “Voice” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Units
US
Metric
Custom
NOTE:
When the “Custom” setting is selected, units will appear according to your personally configured settings. To configure these
settings, press the “Custom” bar. The following settings will appear:
Speed
MPH
km/h
Distance
mi
km
Fuel Consumption
MPG (US)
MPG (UK)
L/100 km
km/L
Pressure
psi
kPa
bar
Power — If Equipped
HP (US)
HP (UK)
Kw
Temperature
°F
°C
Torque — If Equipped
lb-ft
Nm
Setting Name
Selectable Options
Voice Response Length
Brief
Detailed
Show Command List
Always
w/Help
Never
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
533
Clock
After pressing the “Clock” button on the touchscreen, the following settings will be available:
Camera
After pressing the “Camera” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Sync Time With GPS — If Equipped
On
Off
Set Time Hours
+
–
Set Time Minutes
+
–
Time Format
AM
PM
12hrs
24hrs
Show Time in Status Bar — If
Equipped
On
Off
Setting Name
Selectable Options
Surround View Camera — If
Equipped
On
Off
NOTE:
The “Surround View Camera” feature displays a complete 360 degree view of the vehicle's exterior environment while
backing up.
Surround View Camera Delay — If
Equipped
On
Off
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
534 MULTIMEDIA
NOTE:
The “Surround View Camera Delay” setting determines whether or not the screen will display the 360 degree view image
with guidelines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled if the vehicle’s
speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to the OFF position.
Surround View Camera Guidelines —
If Equipped
On
Off
NOTE:
The “Surround View Rear Back Up Camera Active Guidelines” feature allows you to see active guidelines over the Surround
View camera display whenever the gear selector is put into REVERSE or the Surround View button on the touchscreen is
pressed. The image will be displayed on the radio touchscreen display.
Parkview Backup Camera Delay
On
Off
NOTE:
The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image with
dynamic grid lines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled if the
vehicle’s speed exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to the OFF posi-
tion.
Parkview Camera Delay
On
Off
NOTE:
The “Parkview Camera Delay” setting determines whether or not the screen will display the rear view image with dynamic
grid lines for up to ten seconds after the vehicle is shifted out of REVERSE. This delay will be canceled if the vehicle’s speed
exceeds 8 mph (13 km/h), the transmission is shifted into PARK, or the ignition is switched to the OFF position.
Active Backup Camera Guidelines
On
Off
Setting Name
Selectable Options
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
535
NOTE:
The “Active Backup Camera Guidelines” feature overlays the Rear Backup Camera image with active, or dynamic, grid lines
to help illustrate the width of the vehicle and its project back up path, based on the steering wheel position when the option
is checked. A dashed center line overlay indicates the center of the vehicle to assist with parking or aligning to a hitch/
receiver.
Fixed Backup Camera Guidelines
On
Off
Forward Facing Camera Guidelines —
If Equipped
On
Off
NOTE:
The “Forward Facing Camera Guidelines” feature is an off-road type of feature that shows the path of the tires based on the
steering wheel input.
CHMSL (Center High Mounted Stop
Lamp) Camera Dynamic Centerline —
If Equipped
On
Off
NOTE:
When the “CHMSL Camera Dynamic Centerline” feature is selected, it will assist in backing up for trailer alignment and
hook up.
Setting Name
Selectable Options
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
536 MULTIMEDIA
Safety & Driving Assistance
After pressing the “Safety & Driving Assistance” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Forward Collision Warning
— If Equipped
Off
Warning Only
Warning & Active Braking
NOTE:
Applies brakes to slow the vehicle in case of potential forward collision, or applies brakes and a warning.
Forward Collision Warning
Sensitivity — If Equipped
Near
Med
Far
NOTE:
Sets the distance in which a Forward Collision Warning occurs.
Front ParkSense Volume
Low
Med
High
Rear ParkSense Volume
Low
Med
High
Blind Spot Alert
Off
Lights
Lights & Chime
Power Side Step — If
Equipped
Auto
Store
Hill Start Assist — If
Equipped
On
Off
Tire Fill Assist — If
Equipped
On
Off
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
537
Mirrors & Wipers
After pressing the “Mirror and Wipers” button on the touchscreen, the following settings will be available:
Lights
After pressing the “Lights” button on the touchscreen, the following settings will be available:
Setting Name
Selectable Options
Tilt Side Mirrors In Reverse — If
Equipped
On
Off
NOTE:
When the “Tilt Side Mirrors In Reverse” feature is selected, the outside side-view mirrors will tilt downward when the igni-
tion is in the RUN position and the transmission gear selector is in the REVERSE position. The mirrors will move back to
their previous position when the transmission is shifted out of REVERSE.
Rain Sensing Auto Wipers
On
Off
NOTE:
Automatically adjusts the wiper speed based on the amount of precipitation.
Headlights with Wipers
On
Off
Setting Name
Selectable Options
Headlight Illumination On Approach
–
+
NOTE:
When the “Headlight Illumination On Approach” feature is selected, the headlights will activate and remain on for 0, 30, 60,
or 90 seconds when the doors are unlocked with the key fob.
Headlight Off Delay
-
+
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
538 MULTIMEDIA
NOTE:
When the “Headlight Off Delay” feature is selected, the driver can choose to have the headlights remain on for 0, 30, 60, or
90 seconds when exiting the vehicle.
Headlights With Wipers — If
Equipped
On
Off
NOTE:
When the “Headlights With Wipers” feature is selected, and the headlight switch is in the AUTO position, the headlights
turn on approximately ten seconds after the wipers are turned on. The headlights also turn off when the wipers are turned
off if they were turned on by this feature.
Auto Dim High Beams — If Equipped
On
Off
NOTE:
When the “Auto Dim High Beams” feature is selected, the high beam headlights deactivate automatically under certain
conditions.
Daytime Running Lights
On
Off
Flash Lights with Lock
On
Off
NOTE:
When the “Flash Lights With Lock” feature is selected, the exterior lamps flash when the doors are locked or unlocked with
the key fob. This feature may be selected with or without the sound horn on lock feature selected.
Steering Directed Lights
On
Off
Setting Name
Selectable Options
-------------------------------------------------------------------------------------------------------------------------------------------------------------
MULTIMEDIA
539
Doors & Locks
After pressing the “Doors & Locks” button on the touchscreen, the following settings will be available:
NOTE:
When the “Steering Directed Lights” feature is selected, the headlights turn with the direction of the steering wheel.
Rear Cargo Guidance Lights — If
Equipped
On
Off
NOTE:
When the “Rear Cargo Guidance Lights” feature is selected, the lights in the cargo and bed of the truck will come on either
when the headlight switch is pressed, or the button on the back bed of the truck is pressed.
Setting Name
Selectable Options
Setting Name
Selectable Options
Auto Door Locks
On
Off
Auto Unlock On Exit
On
Off
NOTE:
When the “Auto Unlock On Exit” feature is selected, all doors unlock when the vehicle is stopped and the transmission is in
the PARK or NEUTRAL position and the driver's door is opened.
Flash Lights With Lock
On
Off
NOTE:
When the “Flash Lights With Lock” feature is selected, the front and rear turn signals flash when the doors are locked or
unlocked with the key fob. This feature may be selected with or without the “Sound Horn With Lock” feature selected.
Sound Horn With Remote Start
On
Off
9
-------------------------------------------------------------------------------------------------------------------------------------------------------------
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст