Chrysler Town & Country/Voyager, Dodge Caravan, Plymouth Voyager. Manual — part 312
ENGINE SPECIFICATIONS
.
3.0L ENGINE
9 - 79
ENGINE SPECIFICATIONS (CONT.)
9 - 80
3.0L ENGINE
.
TORQUE
.
3.0L ENGINE
9 - 81
3.3L ENGINE
INDEX
page
page
Camshaft
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Camshaft Bearings—Engine Removed From
Vehicle
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Checking Engine Oil Pressure
. . . . . . . . . . . . . . 110
Connecting Rods
. . . . . . . . . . . . . . . . . . . . . . . . 103
Crankshaft Oil Seals Service
. . . . . . . . . . . . . . . 106
Crankshaft Service
. . . . . . . . . . . . . . . . . . . . . . . 103
Cylinder Block, Piston and Connecting Rod
Assembly Service
. . . . . . . . . . . . . . . . . . . . . . . 99
Cylinder Heads
. . . . . . . . . . . . . . . . . . . . . . . . . . 86
Engine Assembly
. . . . . . . . . . . . . . . . . . . . . . . . . 85
Engine Core Oil and Cam Plugs
. . . . . . . . . . . . . . 98
Engine Lubrication System
. . . . . . . . . . . . . . . . . 107
Engine Mounts
. . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Engine Specifications
. . . . . . . . . . . . . . . . . . . . . 111
General Information
. . . . . . . . . . . . . . . . . . . . . . . 82
Hydraulic Tappets
. . . . . . . . . . . . . . . . . . . . . . . . 92
Installing Piston and Connecting Rod Assembly
. 102
Intake Manifold Sealing
. . . . . . . . . . . . . . . . . . . . 88
Oil Filter
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Oil Pan Service
. . . . . . . . . . . . . . . . . . . . . . . . . 107
Oil Pump Service
. . . . . . . . . . . . . . . . . . . . . . . . 108
Rocker Arms and Shaft Assembly
. . . . . . . . . . . . . 86
Timing Chain Cover, Oil Seal and Chain
. . . . . . . . 94
Valve Service
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Valve Timing
. . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
GENERAL INFORMATION
ENGINE IDENTIFICATION NUMBER OR CODE
The engine identification number is located on the
rear of the cylinder block just below the cylinder head
(Fig. 2).
ENGINE: The 3.3L (201 Cubic. Inches.) displace-
ment engines are 60° V type six cylinder power plant
with cast iron cylinder block and aluminum cylinder
heads (Fig. 1). Firing order for these engines is 1-2-3-
4-5-6. High turbulence cylinder heads allow a 8.9-1
compression ratio.
CRANKSHAFT: The nodular iron crankshaft is
supported by four main bearings, with number two
being the thrust bearing. Crankshaft end sealing is
provided by front and rear rubber seal.
PISTONS: The pistons are cast aluminum alloy.
Three rings are used. Piston pins, press fitted into
place, join the pistons to forged steel connecting rods.
CAMSHAFTS: The cast iron camshaft is mounted in
four steel backed babbitt bearings. A thrust plate
located in front of the first bearing, and bolted to the
block, controls end play. Silent timing chain drives the
camshaft. This chain is enclosed by a cast aluminum
cover which also carries a front crankshaft seal, pro-
vides front oil pan closure, water pump mounting.
CYLINDER HEADS: Cylinder heads incorporate
valve shrouding to create turbulence-producing com-
bustion chambers, described as fast burn. Sintered
SPECIFICATIONS
9 - 82
3.3L ENGINE
.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст