SsangYong Korando II (1996-2006 year). Manual — part 194
OM600 ENGINE CONTROLS 1F3 -- 17
DAEWOO MY_2000
FUEL PUMP TEST
Notice
Before test, replace the fuel filter cartridge and fuel pre-
filter.
Fuel Feed Test
1. Disconnect the fuel return line (1) and seal up it with
plug.
2. Insert the plastic hose (5) and put the end into the
measuring beaker (6).
3. Disconnect the vacuum line (4) from vacuum unit
(engine stop) (5) and connect the vacuum pump (7)
to the vacuum unit.
4. To avoid the engine starting, build up vacuum
(approx. 500 mbar).
5. Operate the starter motor for exactly 30 seconds
and measure fuel volume in the beaker.
Min. volume
150cm
3
for 30 seconds
1F3 -- 18 OM600 ENGINE CONTROLS
DAEWOO MY_2000
Fuel Pressure Test
OM600 ENGINE CONTROLS 1F3 -- 19
DAEWOO MY_2000
Tools Required
617 589 04 21 00 Tester
1. Disconnect the fuel line (2) from the fuel filter.
2. Remove the banjo bolt (4) from the fuel injection
pump and remove the seals (3) and fuel line (2).
3. Connect the tester (5).
4. Start the engine and read off the fuel pressure on
tester (5).
Notice
At Idle Speed
> 0.3bar
At Full load
> 0.5bar
If out of standard, replace the fuel feed pump.
Tester 617 589 04 21 00
5. Stop the engine.
6. Remove the tester.
7. Replace the seal and connect the fuel line (2).
1F3 -- 20 OM600 ENGINE CONTROLS
DAEWOO MY_2000
FUEL PUMP
1 Fuel Injection Pump
2 Pressure Line
13N∙m (10 lb-ft)
. . . . . . . . . . . . . .
3 Suction Line
4 Hose Clip
Replace
. . . . . . . . . . . . . . . . . . . . . . . .
5 Gasket
Replace
. . . . . . . . . . . . . . . . . . . . . . . . . .
6 Spring Lock Washer
7 Hexagon Nuts
8 Fuel Pump
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст