SsangYong Korando II (1996-2006 year). Manual — part 439
INTERIOR TRIM 9G-5
SSANGYONG MY2002
E
F
KAA9G060
KAA9G050
A-PILLAR TRIM PANEL
Removal and Installation Procedure
1. Remove the roof assist handle with the screws.
2. Remove the A-pillar trim panel.
3. Installation should follow the removal procedure
in the reverse order.
6. Disconnect the electrical connector.
7. Remove the door trim panel.
8. Installation should follow the removal procedure
in the reverse order.
KAA9G080
KAA9G070
3. Remove the upper quarter trim panel.
4. Installation should follow the removal procedure
in the reverse order.
UPPER QUARTER TRIM PANEL
Removal and Installation Procedure
1. Remove the roof assist handle with the screws.
2. Remove the seat belt anchor with the bolt.
Installation Notice
•
Dissimilar metals in direct contact with each
other may corrode rapidly. Make sure to use
the correct fasteners to prevent premature
corrosion.
Tightening Torque
45 N•m (33 lb-ft)
SSANGYONG MY2002
9G-6 INTERIOR TRIM
;
;
;
y
y
y
KAA9G100
KAA9G090
2. Remove the armrest. Refer to Section 9H “SEATS”.
3. Remove the ashtray and compartment lamp from
lower quarter trim panel.
4. Remove the roof rear trim and back panel cover.
LOWER QUARTER TRIM PANEL
Removal and Installation Procedure
1. Lift up the rear seat from the floor.
KAA9G120
KAA9G110
COWL SIDE TRIM PANEL
Removal and Installation Procedure
1. Remove the cowl side trim panel. Refer to front
rocker trim panel in this section.
2. Remove the cowl side trim panel with the screws.
3. Installation should follow the removal procedure
in the reverse order.
5. Remove the lower quarter trim panel with the
screws.
6. Installation should follow the removal procedure
in the reverse order.
INTERIOR TRIM 9G-7
SSANGYONG MY2002
KAA9G140
KAA9G130
FLOOR CONSOLE
Removal and Installation Procedure
1. Remove the screws.
2. Remove the floor console.
3. Disconnect the electrical connector.
4. Installation should follow the removal procedure
in the reverse order.
FRONT ROCKER TRIM PANEL
Removal and Installation Procedure
1. Remove the screws.
2. Remove the rocker trim panel.
3. Installation should follow the removal procedure
in the reverse order.
KAA9G160
KAA9G150
6. Remove the luggage hook with the mounting
screws.
7. Remove the front seat. Refer to Section 9H, Seats.
FLOOR CARPET
Removal and Installation Procedure
1. Disconnect the negative battery cable.
2. Remove the rear seat. Refer to Section 9H, Seats.
3. Remove the bolts and the left and the right lower
seat belt anchors.
4. Remove the child seat anchor. Refer to Section
9H, Seats.
5. Remove the floor carpet screws.
SSANGYONG MY2002
9G-8 INTERIOR TRIM
KAA9G170
8. Remove the kick panel. Refer to “Kick Panel” in
this section.
9. Remove the lower quarter trim panel. Refer to
“Lower Quarter Trim Panel” in this section.
10. Remove the front floor carpet.
11. Installation should follow the removal procedure
in the reverse order.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст