SsangYong Musso. Manual — part 403
1B3-174 OM600 ENGINE MECHANICAL
OIL SPRAY NOZZLE
1 Fitting Sleeve
2 Oil Spray Nozzle
Disassembly Procedure
1. Remove oil pan or crankshaft.
2. Loose the bolt and then remove the nozzle.
3 Combination Bolt . . . . . . . . . . 10 Nm
A Oil Duct
OM600 ENGINE MECHANICAL 1B3-175
OIL PUMP
1 Oil Pump
2 Piston
3 Pressure Spring
4 Guide Pin
5 Screw Plug . . . . . . . . . . . . 50 Nm
6 Combination Bolt . . . . . . . . . .. 25 Nm
7 Oil Strainer
8 Bracket
Disassembly Procedure
1. Remove the oil pan.
2. Unscrew the mounting bolt of spracket.
1B3-176 OM600 ENGINE MECHANICAL
Tightening Torque
10 Nm
3. Unscrew the oil strainer bracket bolt.
4. Remove the oil pump.
5. Unscrew the screw plug and remove the relief valve.
6. Installation should follow the removal procedure in the
reverse order.
OM600 ENGINE MECHANICAL 1B3-177
CYLINDER HEAD PRESSURE LEAKAGE TEST
Preceding Work : Removal of the cylinder head
Removal of the exhaust manifold
Removal of the valve
1 Feed Pipe
2 Bolt
3 Return Connection
4 Gasket . . . . . . . . . . . . . . . . Replace
5 Coolant Gallery . . . . . . . . . . . . ... Sealing
6 Pressure Measuring Plate . . . . . . . . .. Completely tight to the cylinder head
7 Cylinder Head . . . . . . . . . . . . . .
Immerse with pressure measuring plate into warm water of approx. 60°C and pressurize with compressed
airof 2 bar.
Notice
If air bubbles are seen, replace the cylinderhead.
Tools Required
115 589 34 63 00 Pressure Measuring Plate
601 589 00 25 00 Suspension Device
UNIT REPAIR
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст