SsangYong Musso. Manual — part 376
1B3-66 OM600 ENGINE MECHANICAL
18. Remove the timing case cover (19) bolts and then remove
the timing case cover (14).
Notice
Be careful not to damage the cylinder head gasket or oil
pan gasket.
13. Remove the camshaft.
14. Remove the socket bolts(4) in the chain box.
Socket Wrench 115 589 03 07 00
15. Remove the injection pump.
Notice
See the ‘Removal of fuel injection pump’.
16. Remove the oil pan bolts (8, 9) in the area of the timing
case cover (14).
17. Slightly loosen the remaining oil pan bolts.
OM600 ENGINE MECHANICAL 1B3-67
Installation Procedure
1. Thoroughly clean the sealing surface and apply sealant.
2. Install the timing case cover.
Notice
Bolts arrangement
1.M6 x 60
2.M6 x 70
3.M6 x 40
3. Tighten the socket bolts in the chain box.
Tightening Torque
10 Nm
Tightening Torque
23 Nm
4. Tighten the oil pan bolts.
Tightening Torque
10 Nm
10 Nm
23 Nm
Socket bolt
M6 bolt
M8 bolt
1B3-68 OM600 ENGINE MECHANICAL
Tightening Torque
25 Nm
5. Install the flange, vibration damper and crankshaft belt
pulley.
Notice
Replace front radial seal if necessary.
6. Install the alternator bracket.
25 Nm
Front
Side
7. Install the alternator
Tightening Torque
Upper - 25 Nm
Low - 25 Nm
8. Install the cylinder head cover.
Tightening Torque
10 Nm
9. Tighten the injection pump mounting bolts.
Tightening Torque
23 Nm
OM600 ENGINE MECHANICAL 1B3-69
10. Install the fuel filter.
11. Install the vacuum pump.
12. Install the power steering pump.
13. Install the power steering pump pulley.
Tightening Torque
25 Nm
Tightening Torque
10 Nm
Tightening Torque
23 Nm
Tightening Torque
32 Nm
14. Install the guide pulley bracket.
Tightening Torque
9 Nm
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст