SsangYong Musso. Manual — part 24
9L-2 GLASS AND MIRRORS
OUTSIDE MIRROR
SCHEMATIC AND ROUTING DIAGRAMS
GLASS AND MIRRORS 9L-3
AUTO DIMMING ROOM MIRROR
9L-4 GLASS AND MIRRORS
MAINTENANCE AND REPAIR
ON-VEHICLE SERVICE
FRONT & SIDE GLASS
GLASS AND MIRRORS 9L-5
Installation of Windshield
1. Cleaning of windshield mounting flange.
!
Do not reuse a gauze over 20 times.
!
Saturate the gauze in solvent (lsoprophyl alcohol).
!
Keep the cleaned surface to be cleaned.
!
Apply body primer to the cleaned and dry body flange.
!
If body flange is oiled or contaminated, primer can not
be applied.
!
Duration : 3 minutes - 8 hours (reapply after 8 hours).
!
If primer is applied to the body, clean off immediately
with solvent (ethyl alcohol and ethyl acetate, 50 : 50 in
volume).
!
Do not apply primers which is over its duration.
!
Be careful not to contaminate other parts.
2. Installation of windshield spacer.
!
Insert the spacer completely.
!
After inserting, there should be no clearance on the body.
- To the direction of the side spacer.
- To the direction of the lower spacer.
3. Cleaning of windshield glass.
!
Clean the windshield glass keeping 15mm from the edge
of glass.
!
Do not reuse a gauze over 20 times.
!
Saturate the gauze in solvent (lsoprophyl alcohol).
!
Do not touch the cleaned glass surface.
!
Apply glass primer to the cleaned and dry glass.
!
If glass is oiled or contaminated, primer can not be
applied.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст