SsangYong Korando III (2010 year). Manual — part 84
01-10
Jack-up points and setup
(rear side)
Jack-up points and setup
(front side)
2. JACK-UP POINTS
Stand jack-up points and installation status (front side)
▶
Jack-up points
for 2-post lift
Jack-up points
for 2-post lift
Supporting
Supporting
01-11
0000-00
3. STANDARD BOLTS SPECIFICATIONS
Metric bolt strength is embossed on the head of each bolt. The strength of bolt can be classified as
4T, 7T, 8.8T, 10.9T, 11T and 12.9T in general.
Observe standard tightening torque during bolt tightening works and can adjust torque to be proper
within 15 % if necessary. Try not to over max. allowable tightening torque if not required to do so.
Determine extra proper tightening torque if tightens with washer or packing.
If tightens bolts on the below materials, be sure to determine the proper torque.
1)
2)
3)
4)
Aluminum alloy: Tighten to 80 % of above torque table.
Plastics: Tighten to 20 % of above torque table.
-
-
01-12
4. CODING AND SETUP
1) Engine Variant Coding
Description
Coding
Vehicle speed input to ECU
CAN
with ABS or ESP: CAN
WIRE
Fan
3 Relays
3 Relays
PWM fan
Auto cruise
NO
with Auto cruise system: YES
YES
Engine level control
NO
without Engine level control system: NO
(Korando)
YES
G-sensor
NO
with 2WD ABS and non-ABS: NO
with 4WD ABS and ESP: YES
YES
Smart key
NO
with Smart key: YES
YES
01-13
0000-00
1. ENGINE COMPARTMENT
Coolant reservoir
OCV
Ignition coil
Rear oxygen sensor connector
Front oxygen sensor connector
Coolant temperature sensor
Purge control solenoid valve
Engine ECU
Battery
Fuse box
1.
2.
3.
4.
5.
6.
7.
8
9.
10.
HECU assembly
Alternator
Fuel rail assembly
Injector
Intake manifold
Oil dipstick gauge
VIS solenoid valve
T-MAP sensor
Electronic throttle body
Air cleaner assembly
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст